Last seen: Sep 19, 2024
@cathoderay A further test would be to move one of the energy devices to position 23, 24, 25 and 26 in the message body and see if it appears in the...
Maybe try adding Byte23, Byte24 and Byte25 in the same manner as outdoor_temperature. So it is possible to add devices to the type 01 message, but t...
@cathoderay I have made some changes around the 'class MessageSet (MessageC3Base)' code within C3 message.py, as detailed in the attached text docum...
@cathoderay I am in the process of modifying the C3 files, but I'm uncertain about the code where the NewProtocolTags are declared in AC message, wh...
What are the readings on the temperature gauges at the UFH manifolds?
The main reason would be that the Sontex is designed and built to measure heat energy, it is a heat meter, that is its primary function. The device ha...
If you are changing the pump speed on the FTC controller, it will only vary the flow rate if it is wired to the main water pump and is actually varyin...
Correct me if I am wrong, do I assume that the list of 'entities' that appear on the selection screen, contains the same devices as contained within D...
The list to which I referred was the 'Extra Entities' in which you had to select the ones required. Does the list just contain the ones that have been...
Please post any results that you obtain, or let me know if nothing is forthcoming.
@cathoderay That is also interesting. Can you supply a list of all the sensor names that are located in the list. I have just spent a few hours tr...
@cathoderay I have just found this code which looks quite interesting. The way that I interpret this code, is that extra switches and/or sensors can...
Latest Posts
-
RE: Big Changes Coming to Our Heat Pump System
@editor your engineer's attitude is truly horrifying. ...
By GrahamF , 5 hours ago
-
@cliffhanger - seriously though, I have no idea. What I...
By cathodeRay , 7 hours ago
-
RE: How to choose Towel Rails for an ASHP
@rob-nezard yes absolutely. Here is the link and a pho...
By GrahamF , 7 hours ago
-
@mixergy Thanks for the update, I would appreciate some...
By bontwoody , 9 hours ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
Unfortunately I'm not that well connected 😂 ...
By Scalextrix , 13 hours ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
It is interesting to see what our new Grant Aerona 290 ...
By GrahamF , 15 hours ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
I've never physically seen it, but I seem to recall som...
By cathodeRay , 15 hours ago
-
@jamespa Ours is a Daikin EDLA03 8 kW and the Delta T =...
By Toodles , 16 hours ago
-
RE: Midea ASHP – how to set weather compensation
I noticed that too and thought the same thing, but then...
By cathodeRay , 1 day ago
-
RE: Ya can’t win! It is S*d’s Law!
@old_scientist If IOF is still running next late spring...
By Toodles , 1 day ago
-
RE: Electricity price predictions
Those of you on Agile will do well tomorrow; there are ...
By Toodles , 1 day ago
-
RE: Who’s Caved and Switched the Heating On Already?
We've been running our Ecodan system, installed in June...
By Sheriff Fatman , 2 days ago
-
Ok. Two schools of thought. The first is to run the ...
By JamesPa , 2 days ago
-
@drei Willing as I am to help, I don't think I'm yet ...
By JamesPa , 2 days ago
-
Selling 5 year old ASHP & Gas Combi Boiler - £590
Selling a 5-year-old Daikin Altherma Hybrid Air Source ...
By Paul G , 2 days ago
-
RE: Help me keep the faith with my air source heat pump installation
Er true, it should have read l/hr!
By JamesPa , 3 days ago
-
RE: Is a Valliant Inline 6kW heater a BUS buster?
Much of that is true in principle, but its not likely t...
By JamesPa , 4 days ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
@dgclimatecontrol I attach the responses from 2 potenti...
By pash44pump , 4 days ago
-
RE: Buffers, hot water and cooling
@dgclimatecontrol thanks, that's helpful.
By JamesPa , 5 days ago
