Last seen: Sep 19, 2024
@newhouse87 I forgot to mention. Have a look at the manual for the controller, there may be an icon on the controller display which indicates if the...
To test if this is the cause of energy consumption, set the temperature down so that the heat pump stops, as you do with the overnight setback, then i...
But at least the applicator is easy to take apart and clean now. 😋
Try lowering the heat pump DHW setting to 50C, and raising the iBoost setting to 60C.
@iantelescope Why TWICE? Did they allow him to rejoin after slapping his wrist? I would suggest that you record the temperatures around your heat ...
I would hope there would be a label fitted somewhere stating the concentration of anti-freeze added, if that is the case. If not contact your installe...
This is an extract from the manual. 7.6.4 To protect the water circuit againstfreezingFrost can damage the system. To prevent the hydraulic componen...
Look through the controller settings and see if the BUH is enabled and the value of any temperature setting.
The rating should be specified somewhere in the manual. What does the manual state about when the BUH should operate?
Is the BUH rated at 6kW and is it enabled?
Did the outside temperature actually go below zero? Do you have a backup or booster heater installed? Check through all the controller settings to...
What are all the readings on the controller telling you? Have any sensors failed?
Latest Posts
-
RE: Help me keep the faith with my air source heat pump installation
@jamespa the paving slabs are not cemented down just we...
By AdamK , 2 hours ago
-
@jamespa thanks, I appreciate the offer. For n...
By DREI , 5 hours ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
@transparent what I don't understand about these "rogue...
By Scalextrix , 8 hours ago
-
RE: Who’s Caved and Switched the Heating On Already?
I have 3 women in the house, 2 little ones, so my heati...
By DREI , 10 hours ago
-
@damon thanks. I will do as you suggest. Hopefully I wi...
By bontwoody , 10 hours ago
-
RE: Is a Valliant Inline 6kW heater a BUS buster?
Much of that is true in principle, but its not likely t...
By JamesPa , 1 day ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
@dgclimatecontrol I attach the responses from 2 potenti...
By pash44pump , 1 day ago
-
RE: Midea ASHP – how to set weather compensation
Mostly, I think, but with some caveats. I set the TI...
By cathodeRay , 2 days ago
-
RE: Buffers, hot water and cooling
@dgclimatecontrol thanks, that's helpful.
By JamesPa , 2 days ago
-
RE: Failing heat pump system - seeking thoughts on a rebuild
I realise im overdue an update on my situation. first...
By Cleardene-ashp , 2 days ago
-
RE: Replacing Worcester oil boiler with an ASHP
@toodles thanks. I was told by the engineer that this h...
By JulianC , 2 days ago
-
RE: What crazy nonsense are inverter limits and why are they imposed?
A week later, I'm finally picking up this comment... ...
By Transparent , 3 days ago
-
RE: COP is not the only measure of efficiency
We keep all our TRVs fully open using the whole house a...
By Old_Scientist , 3 days ago
-
RE: Havenwise App Help & Forum Support – Get the Most from Your Heat Pump
I am pleased to say at 4pm today we have added another ...
By ASHP-BOBBA , 3 days ago
-
RE: Renewables & Heat Pumps in the News
To unpack this a little.... 1) how many of us in this...
By Lucia , 4 days ago
-
RE: Vaillant aroTherm Plus 10kW thoughts?
@realevil the fans and fan speed / coil size (height, w...
By ASHP-BOBBA , 4 days ago
-
RE: Mitsubishi Ecodan 11kw Defrosting Issue.
@morgan this can just be done by your sepecilist when t...
By ASHP-BOBBA , 4 days ago
-
RE: Anyone still weathering it out with Agile?
@toodles I guess it all comes down to import averages. ...
By Tim441 , 4 days ago
-
RE: 300 Liter Tank - Do I have to heat it all?
The size of DHW tank affects the anti-legionella cycle....
By Transparent , 4 days ago
