Last seen: Sep 19, 2024
@newhouse87 I forgot to mention. Have a look at the manual for the controller, there may be an icon on the controller display which indicates if the...
To test if this is the cause of energy consumption, set the temperature down so that the heat pump stops, as you do with the overnight setback, then i...
But at least the applicator is easy to take apart and clean now. 😋
Try lowering the heat pump DHW setting to 50C, and raising the iBoost setting to 60C.
@iantelescope Why TWICE? Did they allow him to rejoin after slapping his wrist? I would suggest that you record the temperatures around your heat ...
I would hope there would be a label fitted somewhere stating the concentration of anti-freeze added, if that is the case. If not contact your installe...
This is an extract from the manual. 7.6.4 To protect the water circuit againstfreezingFrost can damage the system. To prevent the hydraulic componen...
Look through the controller settings and see if the BUH is enabled and the value of any temperature setting.
The rating should be specified somewhere in the manual. What does the manual state about when the BUH should operate?
Is the BUH rated at 6kW and is it enabled?
Did the outside temperature actually go below zero? Do you have a backup or booster heater installed? Check through all the controller settings to...
What are all the readings on the controller telling you? Have any sensors failed?
Latest Posts
-
RE: Midea ASHP – how to set weather compensation
@cathoderay and others. Latest update Heat Loss Surve...
By pash44pump , 30 seconds ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
The weather being what it is, gales then showers round ...
By cathodeRay , 12 minutes ago
-
Ya can’t win! It is S*d’s Law!
I have been receiving invitations from Octopus Energy t...
By Toodles , 31 minutes ago
-
RE: Who’s Caved and Switched the Heating On Already?
We've been running our Ecodan system, installed in June...
By Sheriff Fatman , 3 hours ago
-
RE: Electricity price predictions
@julianc Expressed as a flow diagram, I suspect one wou...
By Toodles , 5 hours ago
-
RE: Big Changes Coming to Our Heat Pump System
@jamespa The dormitories at my boarding school (in Exet...
By Toodles , 5 hours ago
-
Ok. Two schools of thought. The first is to run the ...
By JamesPa , 21 hours ago
-
@drei Willing as I am to help, I don't think I'm yet ...
By JamesPa , 22 hours ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
I hear you on the locality issue @transparent, and I ag...
By Scalextrix , 24 hours ago
-
Selling 5 year old ASHP & Gas Combi Boiler - £590
Selling a 5-year-old Daikin Altherma Hybrid Air Source ...
By Paul G , 1 day ago
-
RE: Help me keep the faith with my air source heat pump installation
Er true, it should have read l/hr!
By JamesPa , 1 day ago
-
@damon thanks. I will do as you suggest. Hopefully I wi...
By bontwoody , 2 days ago
-
RE: Is a Valliant Inline 6kW heater a BUS buster?
Much of that is true in principle, but its not likely t...
By JamesPa , 3 days ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
@dgclimatecontrol I attach the responses from 2 potenti...
By pash44pump , 3 days ago
-
RE: Buffers, hot water and cooling
@dgclimatecontrol thanks, that's helpful.
By JamesPa , 4 days ago
-
RE: Failing heat pump system - seeking thoughts on a rebuild
I realise im overdue an update on my situation. first...
By Cleardene-ashp , 4 days ago
-
RE: Replacing Worcester oil boiler with an ASHP
@toodles thanks. I was told by the engineer that this h...
By JulianC , 4 days ago
-
RE: What crazy nonsense are inverter limits and why are they imposed?
A week later, I'm finally picking up this comment... ...
By Transparent , 4 days ago
-
RE: COP is not the only measure of efficiency
We keep all our TRVs fully open using the whole house a...
By Old_Scientist , 4 days ago
