Last seen: Jul 4, 2025
@derek-m I'm finding my batteries are very useful in bringing down my current tariff. However for those without batteries I think the payoff may be ma...
@jeff if you work for octopus... Yes of course...
@editor no it should be fine. The roof was never a problem before. It's not being lifted by much. Just enough for a loft extension... I hope
@lizzylou given you have about 200m2 of floor area and a well insulated house (I will assume its pretty well insulated given the age) 18kW seems exces...
@peterr you need to consider its November. This month should be approximately 12% of your total heating bill. Given there are 12 months (8% a month) t...
below is the detailed breakdown of my use Here is an extract from a cold, high use day Currently I also have an issue with solar shading due t...
Just waiting on the full bill to appear, but I can see I used 1031.88 kW from the 21st of October to the 20th of November at a cost of £110.33 Cost ...
Tweaked my curve last night. Went to 50@-3 and 25@17 down from -4 and 18. House is warmer today. The back room remains my largest issue, as its the ha...
@jeff try just buying a cheap electricity meter with a CT clamp and put it round the power for the HP. There are loads of cheap ones with online monit...
I'd wait for the heat loss to come in and see what the report says. In the meantime, do you know the size of your main fuse? You should be able to get...
- 26 Forums
- 2,136 Topics
- 46.8 K Posts
- 22 Online
- 5,662 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Why so many sigenergi installer recommendations?
I've noticed lots of love for them on YouTube too - I w...
By Old_Scientist , 1 hour ago
-
RE: Sanity check please. Battery storage and inverter sizing.
So you already have a 3.68kW inverter / solar install? ...
By Old_Scientist , 2 hours ago
-
RE: Rodents! A word of warning for heat pump owners
We repair a few ASHP a year from rodents damage especia...
By ASHP-BOBBA , 2 hours ago
-
@editor Something changed in this last 12 months, they ...
By ASHP-BOBBA , 3 hours ago
-
RE: Ecodan & MelCloud scheduling
I put the above question to Mitsu UK at the sme time as...
By DavidAlgarve , 11 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Forum Handle: EGP01 Manufacturer: Samsung Model: 8K...
By EGP01 , 1 day ago
-
Thanks for the heat geek info. I've fitted my own heat ...
By bontwoody , 1 day ago
-
RE: Does anyone have experience of a smart water meter?
Just to give a sense of scale, I've used the CCW water ...
By Majordennisbloodnok , 1 day ago
-
RE: Powerwall 3 or Myenergi or something else?
We have a Tesla Powerwall 3, recently installed, so I m...
By Old_Scientist , 2 days ago
-
RE: Mitsubishi PAR-WT60R-E Wireless Controller installation
@morgan They have been paired once but it was thought b...
By DavidAlgarve , 3 days ago
-
RE: Isolating the system for a planned power cut
A great many ground-mounted local substation transforme...
By Transparent , 3 days ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
Having bit the bullet and paid £250 for a service, our ...
By Old_Scientist , 4 days ago
-
New heat pump heating system underperforming in Italy... Advice needed!
hi all, first post! I've just renovated a house in sout...
By robinlawrie , 4 days ago
-
RE: Anyone still weathering it out with Agile?
I went to Agile when I had solar installed July last ye...
By NJT , 5 days ago
-
RE: Mitsu Wireless Controller and MelCloud
Well it has now become obvious that the installation of...
By DavidAlgarve , 5 days ago
-
RE: Say hello and introduce yourself
Whilst you're busy installing services (pipes and wires...
By Transparent , 6 days ago
-
RE: New Vaillant aroTherm Plus in black - When will it come to the UK?
@editor I know it was formally announced at Ish the oth...
By PatrickVito , 1 week ago
-
@moman0311 welcome to the forums. I've received your em...
By Mars , 1 week ago
-
RE: Thermostat for Ideal Logic Air with 3 zone support
No harm at all in plumbing it as 3 zones, I would have ...
By JamesPa , 1 week ago
-
RE: ASHP heat output monitoring
@carlo I see there is a discussion in Facebook user gro...
By Tim441 , 1 week ago