Forums

Forums
Renewable Heating
Air Source Heat Pum...
Weather comp and se...
 
Notifications
Clear all

Weather comp and set back?

 
Air Source Heat Pumps (ASHPs)
Last Post by @sand 3 years ago
4 Posts
4 Users
2 Reactions
2,704 Views
RSS
 Benseb
(@benseb)
Reputable Member Member
Joined: 3 years ago
Posts: 109
Topic starter 20/08/2022 1:34 pm  

So quick background..  I have an Ecodan 14kw, a 250sqm old house. FTC5. 

Working well but keen to optimise. 

We’ve been running in Weather Comp but with Tado room stats calling for heat (Rads upstairs, mix of UFH/Rads down)

 

I understand using the Tado stats isn’t great and we’re best trying  to just use weather comp and tweaking until we get the best room temp. Perhaps set the stats +2c in case of solar gain or the log burner being on, but to turn off only (not call for heat)

 

My current lack of knowledge is around doing an overnight setback. Obviously we could easily do this with the Tado but it seems like what we SHOUlD be doing is reducing the WC curve by say 3c so it runs cooler overnight and therefore room temps go down. Otherwise we’re keeping the flow temp higher than it needs to be for no reason. 

I can’t see anyway on the FTC5 to reduce the WC on a timer. It’s either on or off. I could fiddle with the +/- before bed/in the morning but I don’t like manual interventions!

 

Any ideas? Sorry if this has been covered before, couldn’t see anything from a search. 


250sqm house. 30kWh Sunsynk/Pylontech battery system. 14kWp solar. Ecodan 14kW. BMW iX.


   
Quote
Topic Tags
ashp Ecodan
 Kev M
(@kev-m)
Famed Member Member
Joined: 5 years ago
Posts: 1276
21/08/2022 9:51 am  
I have almost the same set up as you and have got weather comp working just about spot on with little intervention from the thermostats. I just use the FTC timer to switch the heating off between 12-5am.  It has a similar effect as setting back. It doesn't make a huge difference to energy used though; see below (red dots are heating off 12-5).  The problem is that you're asking the ASHP to work hardest when it's coldest (i.e. at 5am).

I agree it's a shame the FTC doesn't allow weather comp adjustments on a timer.    

 

kWh vs Ambient (5)

This post was modified 3 years ago by Kev M

   
👍
2
ReplyQuote
 Alec Morrow
(@alec-morrow)
Honorable Member Contributor
Joined: 4 years ago
Posts: 216
25/08/2022 9:29 pm  

if you talk to tado they may be able to use the digital interface..which would make everything work in harmony..

 

you would need the EU extension kit though

 

THE uK extension kit is dumbed down for the UK

 

you 


Professional installer


   
ReplyQuote
 @sand
(@sand)
Estimable Member Member
Joined: 4 years ago
Posts: 74
11/12/2022 11:35 pm  
20221209 102904
20221209 102912

I agree a WC / flow  timer would be good I would defo be reducing flow tonight with a  forcast of -4 .

We do temp set backs on the timer, for each zone, the manual isn't very clear on setbacks. 



   
ReplyQuote
Forum Jump:
  Previous Topic
Next Topic  
Related Topics
Topic Tags:  ashp (73) , Ecodan (30) ,



Share:

Join Us!

Podcast Picks

Latest Posts

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →