Noisy Wilo Circulation Pump on Joule Preplumbed Cylinder
I have a high pitched oscillating noise coming from the joule preplumbed cylinder in my loft. Have been told it is coming from the wilo pump attached to the cylinder. Finding it very disturbing in bedroom and bathroom below. It makes a noise whenever the unit is running for heating or dhw and also, when it just "circulates" to avoid freezing. Joule have said some noise is normal. But I've also been told a high pitched noise isn't normal. Does anyone else have experience of this or any suggestions?
Our secondary pump attached to the LLH and radiator pipes is a Wilo Pico; this pump is very quiet in normal operation. Have you tried ‘tweaking’ the speed control up or down just a little? I have found the pump does have a ‘sweet spot’ where it is very quiet, (which on our system, coincides with the optimal setting for our LLH balance as it happens). Now this may just be our luck and the system but it might be worth trying if yours is the same model. Regards, Toodles
Toodles, he heats his home with cold draughts and cooks his food with magnets.
-
hum/whine from Wilo circulation pump
6 months ago
-
Ideal Logic 10kW Heat Pump Pipes Noisy and Very Expensive to Run
6 months ago
-
Ecodan - optimal external installation?
2 years ago
-
Ecodan circulation pump
3 years ago
-
Planning Permission for Air Source Heat Pumps
4 years ago
- 26 Forums
- 2,136 Topics
- 46.8 K Posts
- 15 Online
- 5,662 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Sanity check please. Battery storage and inverter sizing.
@old_scientist yes already have a 4kwp array on a vener...
By AdamK , 11 hours ago
-
RE: Rodents! A word of warning for heat pump owners
Thanks for this. My pipe insulation in my garage has...
By JamesPa , 12 hours ago
-
RE: Why so many sigenergi installer recommendations?
I've noticed lots of love for them on YouTube too - I w...
By Old_Scientist , 14 hours ago
-
@editor Something changed in this last 12 months, they ...
By ASHP-BOBBA , 16 hours ago
-
RE: Ecodan & MelCloud scheduling
I put the above question to Mitsu UK at the sme time as...
By DavidAlgarve , 1 day ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Forum Handle: EGP01 Manufacturer: Samsung Model: 8K...
By EGP01 , 2 days ago
-
Thanks for the heat geek info. I've fitted my own heat ...
By bontwoody , 2 days ago
-
RE: Does anyone have experience of a smart water meter?
Just to give a sense of scale, I've used the CCW water ...
By Majordennisbloodnok , 2 days ago
-
RE: Powerwall 3 or Myenergi or something else?
We have a Tesla Powerwall 3, recently installed, so I m...
By Old_Scientist , 3 days ago
-
RE: Mitsubishi PAR-WT60R-E Wireless Controller installation
@morgan They have been paired once but it was thought b...
By DavidAlgarve , 4 days ago
-
RE: Isolating the system for a planned power cut
A great many ground-mounted local substation transforme...
By Transparent , 4 days ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
Having bit the bullet and paid £250 for a service, our ...
By Old_Scientist , 5 days ago
-
New heat pump heating system underperforming in Italy... Advice needed!
hi all, first post! I've just renovated a house in sout...
By robinlawrie , 5 days ago
-
RE: Anyone still weathering it out with Agile?
I went to Agile when I had solar installed July last ye...
By NJT , 5 days ago
-
RE: Mitsu Wireless Controller and MelCloud
Well it has now become obvious that the installation of...
By DavidAlgarve , 6 days ago
-
RE: Say hello and introduce yourself
Whilst you're busy installing services (pipes and wires...
By Transparent , 7 days ago
-
RE: New Vaillant aroTherm Plus in black - When will it come to the UK?
@editor I know it was formally announced at Ish the oth...
By PatrickVito , 1 week ago
-
@moman0311 welcome to the forums. I've received your em...
By Mars , 1 week ago
-
RE: Thermostat for Ideal Logic Air with 3 zone support
No harm at all in plumbing it as 3 zones, I would have ...
By JamesPa , 1 week ago
-
RE: ASHP heat output monitoring
@carlo I see there is a discussion in Facebook user gro...
By Tim441 , 1 week ago
Members Online
No online members at the moment