MMSP
Has anyone looked into MMSP?
https://www.ofgem.gov.uk/key-term-explained/metering-and-monitoring-service-package-mmsp
I've had a quote from my supplier. It's quite expensive at nearly £1300 but from what I can understand you get £805 back right away and another £805 back over 7 years. I work that out as about 7.5% per year return before inflation on the £500 I don't get up front, which isn't bad for a fixed return. It's not for the money really, but more for the ability to monitor the system. This is the hardware and software
https://library.mitsubishielectric.co.uk/pdf/book/Ecodan_MMSP_Application_Guide#page-1
Any thoughts?
It was my understand the scheme was full?
I was going by the data below. It suggests that the total number approved so far is nowhere near the total available of 11255
I'll certainly check before committing as I'm definitely not paying for it myself.
I just checked with Ofgem by phone (eventually!) and the graph I linked to is correct if a little out of date. There are only just over 4000 approvals so plenty left before the 11255 is reached.
- 26 Forums
- 2,406 Topics
- 54.6 K Posts
- 380 Online
- 6,092 Members
Join Us!
Worth Watching
Latest Posts
-
Experience - New Build / Complete New Heating System
Introduction We are in the process of completing a ne...
By vincro , 20 minutes ago
-
RE: Setback savings - fact or fiction?
Given the weather has been relatively stable, the empir...
By Batpred , 21 minutes ago
-
New Daikin 11kW Altherma 3M install - is it working as it should?
I had the system installed by Octopus in October last y...
By Synthbuilder , 33 minutes ago
-
RE: Rate the quality of your heat pump design and installation
🤣 what exactly did he dismiss and why?
By Mars , 52 minutes ago
-
RE: Post-Traumatic Heat Pump Stress Disorder
@jamespa Hi James - thanks so much! That sounds like ut...
By johnbroome , 1 hour ago
-
RE: Heat pump not reaching flow temperature
@jamespa system design was for 40 degrees FT at -2 degr...
By DaveC , 1 hour ago
-
RE: GSHP WOES! Midland based engineer recommendations?
@editor That is very kind! Thank you so much.
By johnbroome , 1 hour ago
-
RE: Considering MLCP (Multi-Layer Composite Pipe) for ASHP
@iotum, this is a really good question and you’re right...
By Mars , 2 hours ago
-
RE: ASHP Energy Consumption: Aira 12kW heat pump
@wally Hi I am not sure how large your house is b...
By TechnoGeek , 3 hours ago
-
Please help with the settings ecodan
I have a 160 square meter house, first floor 6 radiator...
By nose1972 , 3 hours ago
-
RE: Predicted Heat Loss & Needs from MCS calcs vs EPC vs actual
I've been thinking along similar lines to @tim441 from ...
By Sheriff Fatman , 3 hours ago
-
Thanks, @technogeek. Good to hear about the accuracy. ...
By Majordennisbloodnok , 4 hours ago
-
RE: Advice for a novice on Mitsubishi Ecodan 6kW
In my case it was a very specific pattern of behaviour ...
By Sheriff Fatman , 4 hours ago
-
RE: Vaillant aroTherm not heating with many faults
@ashp-bobba Yeah I'll give it a go, will check filter...
By Anon67 , 4 hours ago
-
RE: RDSAP10 effect on existing heat pump EPC rating?
@transparent Perhaps the names at the end of the docume...
By Toodles , 4 hours ago
-
RE: Heatpunk Floor plan issues
@jamiejones85 A2A they will design on dynamic heat loss...
By ASHP-BOBBA , 5 hours ago
-
RE: Fan unit Making terrible noise HELP!!
can you post a video looking inside, at and through the...
By ASHP-BOBBA , 5 hours ago
-
RE: Power outages and storms: A surprisingly good DNO experience
Agreed, which is no more nor less than a customer shoul...
By Majordennisbloodnok , 22 hours ago


