Ecodan tank temperature oddity
Hi there,
I’ve noticed the tank temperature in our new Ecodan system is showing strange readings after a shower.
I’ve set it to heat for an hour morning and evening, it is heating up to 48c at these times, as expected, then after a shower the reading drops right down to something like 12c, even though there is loads of hot water left. Any ideas what’s going on with the temp readings here? Wrong type of tank selected in the system settings perhaps?
Cheers
Same with the Grant pre-plumbed cylinder and digital thermostat. My 250L tank shows all manner of random temperatures after drawing hot water. I think this is due to the thermostat sensor pocket being in a position in the tank where cold water entering the tank at low level to replace hot water drawn off influences it. Mains pressure hot water tanks rely on temperature stratification, cold in at the bottom, hot out at the top. You don't want the cold and hot water to mix. I think it's just a feature of the control. My thermostat has shown 10degC before, yet the hot water drawn off is coming out at 45degC and has never run cold.
My Daikin Altherma with integrated tank also often shows the water temperature to be below 20C even when there is still hot water coming out. It's not really a reliable guide - at first I was checking the tank temperature after the shower had been used to see if I needed to put it back on but that doesn't really work and I probably switched it on unnecessarily a few times.
Presumably it also means that the auto reheat will come on before it really needs to, if it is using a reading from low down the tank.
Thanks folks, I’ll just not pay attention to that reading then. Glad I have the water scheduled, sounds like it would cost a fortune if left on auto!
Posted by: @pumpitupThanks folks, I’ll just not pay attention to that reading then. Glad I have the water scheduled, sounds like it would cost a fortune if left on auto!
I don't think you need worry in the short term about having water heating on auto if you want to experiment, although the cumulative cost is worth considering.
I have a Mitsubishi pre-plumbed 300L tank and both heating and DHW are 'always on'. In the summer months with heating off, the heat pump meter recorded 60kWh in July and 55kWh in August i.e. c. 2kWh per day.
2021 built 2 storey detached house, 212 sq.m. / 2300 sq.ft. heated area. EPC 87B. Mitsubishi Ecodan 11.2Kw ASHP, weather compensated flow temp, UFH, MVHR.
Another reason for the scheduling is the tank is next to 2 bedrooms so it was doing our head in the water heating up through the night!
Not 100% sure on the tank size but it’s a small 3 bed semi and using 3kwh per day on our schedule, that’s 48c and enough for everyone to shower (including lengthy girl showers!) and wash dishes etc, seems reasonable enough.
Overall we are using around 10kwh per day in sub zero temps, cop is around 3 just now
- 26 Forums
- 2,129 Topics
- 46.8 K Posts
- 8 Online
- 5,654 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Mitsu Wireless Controller and MelCloud
@morgan Yes, "Prohibit" was the word for when switched...
By DavidAlgarve , 13 hours ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
For reference, our installer has just contacted us afte...
By Old_Scientist , 17 hours ago
-
@toodles Of course. I've also used Tim and Kat's Gree...
By Old_Scientist , 17 hours ago
-
RE: Who's your electricity provider and what's your tariff?
Yes, I noticed that change too. The software really doe...
By Old_Scientist , 17 hours ago
-
RE: Octopus Cosy & Octopus EV + bidirectional smart tariff, together. What, eh?
@old_scientist me too. Just installed my new heat pump ...
By Eliuccio , 1 day ago
-
RE: Is your heat pump insured?
Yup just spoke to Privilege to inform them of my impend...
By Scalextrix , 1 day ago
-
RE: Forum updates, announcements & issues
Just to keep everyone in the loop, as the site continue...
By Mars , 2 days ago
-
RE: Fast DHW setting on Midea (Clivet) heat pump
@simon-w, is this something you could potentially assis...
By Mars , 2 days ago
-
RE: Share Your Experiences with Heat Pump Manufacturer Support
Fwiw I called my installer out for the first time a few...
By JamesPa , 3 days ago
-
RE: New Vaillant aroTherm Plus in black - When will it come to the UK?
@sandy, I'll send Vaillant an email tomorrow and see if...
By Mars , 3 days ago
-
RE: Long term efficiency degradation
@jamespa yes as I thought thanks. We have a reaso...
By Scalextrix , 3 days ago
-
RE: Who has a V2G EV installation
I agree, but a word of caution. V2X is also sometimes u...
By Majordennisbloodnok , 4 days ago
-
RE: Sunamp Thermino Heat Battery
@jamespa A few days after the installation had been com...
By Toodles , 4 days ago
-
RE: Planning Permission May 2025
Fair enough. I have read the legislation and MCS020a ...
By JamesPa , 6 days ago
-
RE: How do I choose a single room MVHR to prevent losing heat in my bathroom ?
An update on the Heatsava. It is the most difficult thi...
By heat-pump-newbie , 6 days ago
-
RE: ASHP heat output monitoring
@carlo - not much better, is it. It looks more like a u...
By cathodeRay , 7 days ago
-
RE: Renewables & Heat Pumps in the News
this document extensively describes (in a non-blame, ne...
By Judith , 7 days ago
-
RE: Ecodan - Legionella Operation Time and Target Temperature
Once the white plastic cap is removed, my immersion loo...
By Old_Scientist , 1 week ago
-
RE: Replacing Refrigerant on Mitsubishi Heat Pump
@dgclimatecontrol I don't know, but they were not happy...
By DavidAlgarve , 1 week ago
-
RE: Why do we need pressurised systems?
A good question @toodles. My old open thermal store and...
By AllyFish , 1 week ago