ASHP tariffs
Hello,
I'm brand new to this forum after searching for the best heat pump tariffs!
Had Grant aerona x2 10kw installed last January along with pv system to heat circa 380sqm
So far so good, but that's helped with the fact I'm on SPower EV tariff where it's 6p/kw MN to 0500 and 31p/kw through the day. My tariff expires sadly in May, so am trying to find the best battery deals for when the crunch happens of the end of the tariff which brought me here.
Currently using circa 16000 kw per year (with 2 EV alongside), but with disciplined RHI repayments and yet to be received SEG payment should mean the price is a lot lower than when we used oil.
We have been more than happy with the heat and hot water delivered through the pump although cylinder has been notched up to 55 degs from 45 and thermometer set at 18.5 - 20 degrees over the cooler periods.
Any Recommendations on battery and size or is it better to purchase more panels (in addition to 4.32 array).
Are there still such tariffs available or any tips on using heat pumps?
We leave ours on manual for heat and overnight to heat the water cylinder. But wondered if it's worth programming the time to a lower temperature through the day to gently increase by .5 each hour until say 0800 in the morning.
Any tips on usage very welcome!
2 10kw Grant Aerona3
Heat loss calc 16.5 kw @ -2.8 degrees
4.32 PV
@bretix To be honest, the time you really need the batteries is the winter and the solar won't really put any power into them. My recommendation is go for as big a battery as you can, get an inverter which can charge/discharge at 5kw (maybe get 2) and move to octopus Go.
That's literally all you can do right now.
- 26 Forums
- 2,102 Topics
- 46.2 K Posts
- 53 Online
- 3,388 Members
Join Us!
Latest Posts
-
RE: Location of hot water isolation valve on cylinder
@rossowheels if you isolate the water supply in it will...
By ASHP-BOBBA , 4 hours ago
-
RE: Ecodan consuming 100kwh per day in new build!!!
From what you say about the radiators upstairs it does ...
By JamesPa , 10 hours ago
-
RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW
@skyefarmer pleased you found it!
By JamesPa , 11 hours ago
-
The Importance of Radiator Balancing for Efficient Heating: Introducing the Flow Regulating Valve
It’s fascinating to watch how low-temperature heating i...
By Mars , 13 hours ago
-
@heacol, if you're around, can you please provide some ...
By Mars , 16 hours ago
-
RE: Servicing Hitachi HP in rural Somerset
I'd give GreenGenUK a call or email them: sales@greenge...
By Mars , 16 hours ago
-
RE: Heating coming on when not required
I played with a max heating temp but there is a world o...
By JamesPa , 1 day ago
-
RE: Pressure drop Primary circuit
I've always regarded topping up heating systems as my j...
By JamesPa , 1 day ago
-
RE: Heat pump solutions and/or installer recommendations for France
I’d travel to France for work if you were struggling wi...
By Damon Blakemore , 1 day ago
-
RE: 5 Star Service from Havenwise
That's always a danger with any new good idea, @morgan....
By Majordennisbloodnok , 2 days ago
-
Have your say in the Renewable Heating Hub Awards
It’s time to celebrate the best (and call out the worst...
By Mars , 2 days ago
-
-
RE: Mitsubishi cycling while on chilled water output
@iaack yes there's no denying that cold air sinks! I s...
By downfield , 3 days ago
-
RE: Weather compensated secondary circuits with Biomass
@andycoo that flooring sounds ideal. Extra volume is ...
By Sune , 3 days ago
-
If you are thinking of heating on the immersion conside...
By JamesPa , 4 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness, I think your best bet would be using ...
By Aventus Eco , 4 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles all depends on asking the right questions! And...
By Tim441 , 4 days ago
Members Online
No online members at the moment