Forums

Forums
Renewable Heating
Air Source Heat Pum...
Adding Dedicated Im...
 
Notifications
Clear all

Adding Dedicated Immersion Heater Element

 
Air Source Heat Pumps (ASHPs)
Last Post by Niko08 3 years ago
1 Posts
1 Users
0 Reactions
1,214 Views
RSS
 Niko08
(@niko08)
New Member Member
Joined: 3 years ago
Posts: 1
Topic starter 23/11/2022 9:08 pm  

Vaillant AroTherm ASHP with VRC 700 controller. We have the cheap overnight tariff (5hours). During the winter the system works best if heating is separated from DHW. Therefore I time the UFH and upstairs to operate during the low tariff schedule. The DHW is timed to operate during the dearer period. 

I am thinking of replacing the current immersion with the T-smart immersion and run it independently (i.e during the low tariff). At present the wiring to the immersion is obviously controlled and operated by the VRC700.

My question, what will be the outcome if a) an electrician disconnects the wiring into the immersion (currently supplied by VRC700) and replaces with dedicated immersion spur to operate the T-smart or b) he connects both cables (doubles up) thereby having a dual supply to the immersion (although only the T smart will actually be used. I don’t want to purchase the T-smart if this is a non starter, i.e could throw the VRC 700 into fault mode or something else.

Our DHW is normally 39deg and heated to 50 deg so the T-smart should, I assume easily cope with the temp increase during the 5 hours and of course the Legionella run. 

Thanks. 


   
Quote
Forum Jump:
  Previous Topic
Next Topic  
Share:

Join Us!

Trusted Installers

Struggling to find a reliable heat pump installer? A poor installation can lead to inefficiencies and high running costs. We now connect homeowners with top-rated installers who deliver quality work and excellent service.

✅ Verified, trusted & experienced installers
✅ Nationwide coverage expanding
✅ Special offers available

👉 Find your installer now!

Latest Posts