Forums

Forums
Renewable Heating
Air Source Heat Pum...
Adding ASHP to ther...
 
Notifications
Clear all

Adding ASHP to thermal store.

 
Air Source Heat Pumps (ASHPs)
Last Post by bontwoody 9 months ago
4 Posts
2 Users
0 Reactions
651 Views
RSS
 Roohairy
(@roohairy)
New Member Member
Joined: 9 months ago
Posts: 2
Topic starter 16/11/2024 3:23 pm  

I have a new heating system design with thermal store to take advantage of heat produced by log burner and oil fired raeburn. The thermal store is prepared foe ASHP with a coil. The store is designed to run at 45 degrees with appropriate  radiators. I'm happy with the design, but I don't understand why coil has been included for the ashp when the log burner, raeburn are both just open circuit. This additional coil is causing problems......

Can I run the ashp on common circuit as well?

I can't ask designer why he specified this, we have parted ways but not because of technical issues.


   
Quote
bontwoody
 bontwoody
(@bontwoody)
Noble Member Contributor
Joined: 3 years ago
Posts: 836
16/11/2024 3:44 pm  

Might it be because the designer assumed the ASHP would be using antifreeze?

House-2 bed partial stone bungalow, 5kW Samsung Gen 6 ASHP (Self install)
6.9 kWp of PV
5kWh DC coupled battery
Blog: https://thegreeningofrosecottage.weebly.com/
Heatpump Stats: http://heatpumpmonitor.org/system/view?id=60


   
ReplyQuote
 Roohairy
(@roohairy)
New Member Member
Joined: 9 months ago
Posts: 2
Topic starter 16/11/2024 6:59 pm  

@bontwoody could be but the whole thermal store will be treated water, not potable. HW will be DHW.

I know it's needed for solar because of the higher pressures, but can't figure out why for ASHP - I was reading through specs for ASHP for pipe sizings as I need to finalise and order tank when I realised they are OK with common thermal store - as far as I can see.

Need to order tank, there is a significant saving to be made if I drop the extra coil, due to design problems.


   
ReplyQuote



bontwoody
 bontwoody
(@bontwoody)
Noble Member Contributor
Joined: 3 years ago
Posts: 836
17/11/2024 6:11 pm  

@roohairy I plumbed (!) for a thermal store in my last house and was advised to have a splarge pipe rather than a coil in it for the heat pump. I hadnt realised that the whole of the store would then need to have antifreeze in it and the cost of that. In the end I used the solar thermal coil instead which got me out of a hole at the time.

Nowadays I would probably use the splarge pipe and omit the antifreeze using anti freeze valves (or nothing depending on your attitude to risk). In your position I think thats what I would now do if ordering a thermal store.

House-2 bed partial stone bungalow, 5kW Samsung Gen 6 ASHP (Self install)
6.9 kWp of PV
5kWh DC coupled battery
Blog: https://thegreeningofrosecottage.weebly.com/
Heatpump Stats: http://heatpumpmonitor.org/system/view?id=60


   
ReplyQuote
Forum Jump:
  Previous Topic
Next Topic  



Share:

Join Us!

Podcast Picks

Latest Posts

Members Online

 No online members at the moment

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →