Octopus tariffs - API & choosing best tariff
one of the reasons its harder for me to take full advantage of periods of lower time of use tariffs is that my Givenergy Gen1 inverter can only charge/discharge from batteries at 2.6kwh. Gen2 and the new All in One offer much better options. My ASHP is a large one ... so again needs bigger throughput to take full advantage. its not worth upgrading as the system works fine and Tracker import with Fixed export is giving a very fair cost.
Overall very happy with the setup - installed 2021 .... before battery & material prices took off.
Listed Grade 2 building with large modern extension.
LG Therma V 16kw ASHP
Underfloor heating + Rads
8kw pv solar
3 x 8.2kw GivEnergy batteries
1 x GivEnergy Gen1 hybrid 5.0kw inverter
Manual changeover EPS
MG4 EV
@tim441 I see that tomorrow (Sunday 30th. July) Octopus Agile has a peppering of very cheap and some negative priced periods available. Guess who has just set up their Eddi to charge the DHW and also set the Tesla app to some negatively charged half hours to fill the battery?! Regards, Toodles
Toodles, he heats his home with cold draughts and cooks his food with magnets.
@toodles yes...very nice! presumably wind is blowing nicely ..
Tracker is down at 12.06p as all day rate so I'm not unhappy with that. My Gen1 Givenergy inverter can only charge batteries at 2.6kwh.
Charging batteries as well as EV ... and heating hot tub!
Key question will be what happens over the winter - I'm hopeful that barring black swans out of Russia/Ukraine/China etc we will see overall wholesale prices well under standard rates
Listed Grade 2 building with large modern extension.
LG Therma V 16kw ASHP
Underfloor heating + Rads
8kw pv solar
3 x 8.2kw GivEnergy batteries
1 x GivEnergy Gen1 hybrid 5.0kw inverter
Manual changeover EPS
MG4 EV
@tim441 No hot tub here or EV for that matter but, tomorrow’s laundry is running a day earlier and the oven is now on a an autoclean cycle! The battery is charging nicely and DHW is up to temperature. I have never been a gambler - that is until Agile came along.;-))) Regards, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
I think I was ‘spoilt’ yesterday/today as tomorrow’s half hourly slots are rather more expensive! I have instructed Eddi not to ‘spend’ more than 10 pence per kW/h to heat the water tomorrow! Ah well, you win some…. (Of course this is still very a good rate by today’s reckoning, but Ill leave any PV output to export where it can as this still rewards me at 15p per kW/h.!) Regards, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
Again, tomorrow (Aug. 3rd.) there are some very cheap half hour slots to avail oneself of for heating water / charging battery type purposes; my DHW will cost less than 10 pence for a day’s supply 😉 Regards, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
Having heard about Octopus Energy introducing ‘Power Ups’ in a trial area at present, I yhought others might like to know more here: https://octopus.energy/press/free-whizz-octopus-launches-power-ups-free-energy-when-the-sun-shines-and-the-wind-blows/
Regards, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
-
Who's your electricity provider and what's your tariff?
2 weeks ago
-
Agile: average import cost vs other tariffs?
2 months ago
-
Switching tariff in Winter? or stick year round?
10 months ago
-
Confusion over Octopus Tariffs
1 year ago
-
Octopus export - standard fixed tariff is 15p
2 years ago
- 22 Forums
- 2,096 Topics
- 46.1 K Posts
- 116 Online
- 3,383 Members
Join Us!
Trusted Installers
Struggling to find a reliable heat pump installer? A poor installation can lead to inefficiencies and high running costs. We now connect homeowners with top-rated installers who deliver quality work and excellent service.
✅ Verified, trusted & experienced installers
✅ Nationwide coverage expanding
✅ Special offers available
Latest Posts
-
RE: Commencing on an ASHP Installation Process
A system like that seems susceptible to significant amo...
By Majordennisbloodnok , 3 minutes ago
-
RE: Mitsubishi cycling while on chilled water output
@jamespa you are so much faster than me, happy to see g...
By ASHP-BOBBA , 10 hours ago
-
@jamespa Thanks for the advice - very helpful. I had al...
By abam48 , 21 hours ago
-
RE: Weather compensated secondary circuits with Biomass
Hi @andycoo we do an LK 110 standalone weather compensa...
By Sune , 21 hours ago
-
RE: Adding battery storage to SolarEdge PV system
@chandykris No need to apologise at all! I forgot to ad...
By Toodles , 2 days ago
-
RE: Say hello and introduce yourself
Yes please do Suggesting a loss in the region...
By JamesPa , 2 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
Can we have some links to those you're considering plea...
By Transparent , 2 days ago
-
As I have reported elsewhere we turned on the cooling o...
By downfield , 3 days ago
-
-
@el3b Hi, sorry to hear that, it is advisable to instal...
By ASHP-BOBBA , 3 days ago
-
RE: Difficult positioning of air source heat pump
@rikiarn Out of intrigue, the thread reads as though Ai...
By Sheriff Fatman , 4 days ago
-
RE: Mitsubishi Ecodan Fails to Heat Water despite temperature drop
@m1kegibson If you are able to access the service me...
By HarriUp , 4 days ago
-
RE: When will heat pumps and install prices come down?
... which of course is impossible because the world mov...
By JamesPa , 4 days ago
-
RE: Battery storage to run Heat Pump.
I would be surprised if the battery chemistry is going ...
By Transparent , 5 days ago