Last seen: Jun 17, 2025
@clockworks The wireless controller will modulate the HP and reduce output as the HP approaches the target room temp- but only when in Auto Adapt m...
The first thing I have seen in your graphs is that opening the TRVs has allowed the emitters to offload more heat, making your home somewhat warmer. I...
@clockworks can you confirm is the 900w you refer to consumption or is it output? If it’s consumption then that’s about right… assuming a cop of 3 whi...
thanks @gary I’ve just also explained that at 30c flow temps the output is even lower esp when you deduct the 2,5c mid temp of the emitters. all th...
Hi @clockworks I’ve just noticed @gary and I sent crossing messages at same time. I don’t want to overload you with too much information. So I’ll...
In principle, most heat pumps are over sized at some point. This usually occurs at the lowest demand and lowest outdoor temperature when we still need...
Hi @clockworks perhaps a bit more background would help; what model HP is it the new R290 or the PUZ-WM60? (They have different minimum outputs) ...
That’s great to here…. im curious, If you’re putting a 2c drop on the flow temp what’s your room temperature drop at the end of the setback? (Of cou...
yes I’m already using weather compensation on our Mitsubishi but, as stated above, there isn’t a scheduled LWT setback option available. The trial I h...
Update: it looks like Daikin do exactly what I’m looking for in this post. I’ve just seen this video done by Heat Geek… over 2 years ago. It’s at 8m...
Hi @jamespa There are other modes as you have queried within the Ecodan scope of operation. You may be aware of the Auto Adaptive setup. This does...
Picking up this thread from last year Following discussion on what is missing in the controls of heat pumps I've done a trial on a different kind o...
Latest Posts
-
@ashp-bobba And super happy fish too I expect 😊...
By Toodles , 13 minutes ago
-
RE: 5 Star Service from Havenwise
Our interview with Henri from Havenwise it out:
By Mars , 2 hours ago
-
RE: Mitsubishi cycling while on chilled water output
@iaack yes there's no denying that cold air sinks! I s...
By downfield , 3 hours ago
-
RE: Weather compensated secondary circuits with Biomass
@andycoo that flooring sounds ideal. Extra volume is ...
By Sune , 6 hours ago
-
RE: Heat pump solutions and/or installer recommendations for France
No idea, but Google-Fu leads me to Bon chan...
By Scalextrix , 23 hours ago
-
If you are thinking of heating on the immersion conside...
By JamesPa , 1 day ago
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness, I think your best bet would be using ...
By Aventus Eco , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles all depends on asking the right questions! And...
By Tim441 , 2 days ago
-
RE: Commencing on an ASHP Installation Process
I received confirmation this morning that my Greener Ho...
By Sheriff Fatman , 2 days ago
-
@jamespa Thanks for the advice - very helpful. I had al...
By abam48 , 3 days ago
-
RE: Adding battery storage to SolarEdge PV system
@chandykris No need to apologise at all! I forgot to ad...
By Toodles , 4 days ago
-
RE: Say hello and introduce yourself
Yes please do Suggesting a loss in the region...
By JamesPa , 4 days ago
-
As I have reported elsewhere we turned on the cooling o...
By downfield , 5 days ago
