Last seen: Jun 17, 2025
Great answers @old_scientist. One other query I have with position G is - the location is on the return side…. after the DHW cycle the system feeds 50...
So... where would you install the volimiser? See choices in the attached sketch. I think this will help to resolve some nagging inconsistencies in pre...
If your UFH is a high mass construction you may be able to store quite a bit of heat so you can run the heating above the cycling temperature or to a ...
I recall some basic maths kwh= LPS X DT X SHC Where the SHC is specific heat carrying capacity (SHC of water is usually quoted as 4.2 whereas glyc...
Hi @jamespa I’ve been travelling for a few days and felt I needed to address some unanswered messages from you. I think and hope we just had some ...
Sorry James the radiator output is governed by temperature of the water inside them and the lower the flow temperature the slower and sustainable the ...
I think Rob Berridge states on this episode that you can’t have “too much” radiator capacity on a HP installetion (if you want the quote try 12 mi...
As per Robs comment @robs this is a R290 model which will operate down to 2kwh output…. ironically R290s are being hailed by some as the high te...
james you appear to be sighting an example which I have never said. I have never asserted this statement so I don’t see why you are saying it. Abov...
@jamespa apologies James I’m on a train so dashing between platforms
@heatgeek I wouldn't normally comment on such a varied emitter scheme. I think I’m just trying to establish a few principles of HP operation in a simp...
Latest Posts
-
RE: Weather compensated secondary circuits with Biomass
@sune thanks for the LK link, looks like a possible opt...
By AndyCoo , 10 hours ago
-
RE: Heat pump solutions and/or installer recommendations for France
No idea, but Google-Fu leads me to Bon chan...
By Scalextrix , 11 hours ago
-
If you are thinking of heating on the immersion conside...
By JamesPa , 23 hours ago
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness, I think your best bet would be using ...
By Aventus Eco , 1 day ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles all depends on asking the right questions! And...
By Tim441 , 1 day ago
-
RE: Mitsubishi cycling while on chilled water output
I absolutely wouldn't remove the buffer altogether, I'd...
By JamesPa , 2 days ago
-
RE: Commencing on an ASHP Installation Process
I received confirmation this morning that my Greener Ho...
By Sheriff Fatman , 2 days ago
-
@jamespa Thanks for the advice - very helpful. I had al...
By abam48 , 3 days ago
-
RE: Adding battery storage to SolarEdge PV system
@chandykris No need to apologise at all! I forgot to ad...
By Toodles , 4 days ago
-
RE: Say hello and introduce yourself
Yes please do Suggesting a loss in the region...
By JamesPa , 4 days ago
-
As I have reported elsewhere we turned on the cooling o...
By downfield , 5 days ago
-
-
@el3b Hi, sorry to hear that, it is advisable to instal...
By ASHP-BOBBA , 5 days ago
