
Last seen: Sep 3, 2025
I wanted to put our r290 gshp near a kitchen drain. And found to my dismay that it didn’t have a trap! Bit of a faff, but managed to swap it out for...
@ggw When the sunsynk is used in lithium % mode, it also still makes use of the basic voltage figures from the lead acid mode - these must be set corr...
@ggw I left ours in AGM volts mode for maybe 2 months, the adaption was automatic but slow. I did try and hurry it along by manually tweaking the A...
We have 304Ah batts too, but after letting the sunsynk auto detect to the size, it thinks they are vastly different to this. Our system now works ver...
When we first installed our Sunsynk I initially tried to use Li-bms as the battery state - this was dreadful, resulting in all sorts of weird behaviou...
@ggw I had a lot of trouble with the sunsynk originally(ok, I still do…). New LiFePo4 battery, with the Seplos bms that talked with it, and yet I fou...
@ggw While I’ve set it to work down to 1%, it’s an extremely rare occurance. Most of the time it cycles 90% to 50%. While I appreciate the degradati...
Screenshots from our Sunsynk. We have an old independent 4kWp FIT install, and our elec is Octopus Go. The sunsynk charges from night elec and PV, r...
@misterb I'd originally intended to top balance in parallel. When I thought it through, it just seemed a lot of faff - how to compress the cells? ...
@misterb Yes. In the case, compressed, with a capacitive active balancer. I think balancing should not be done uncompressed.
We charged our 15.5kWh 280L system to 56V in AGM V mode (3.5V per cell) over the coldest months with Octopus Go, which is 100% or near enough. That w...
@ggw I think the cable to the unit needs to be double insulated if you can touch it. Ideally the twisted pair from the CT should be away from any ma...
- 26 Forums
- 2,171 Topics
- 47.8 K Posts
- 18 Online
- 5,744 Members
Podcast Picks
Latest Posts
-
RE: Powerwall 3 or Myenergi or something else?
Many of those tariffs are simple time of use tariffs, w...
By Temperature_Gradient , 5 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
Yes thats the whole point of the flexis as regards tran...
By JamesPa , 5 hours ago
-
So far as I can tell designing for DT5, which is 'the n...
By JamesPa , 6 hours ago
-
Mitsu PAR-WT60R Wireless Controller - options
I hope I have satisfactorily installed the above wirele...
By DavidAlgarve , 8 hours ago
-
WC curve best discovered by experiment anyway as any lo...
By JamesPa , 12 hours ago
-
RE: Big Changes Coming to Our Heat Pump System
@editor your engineer's attitude is truly horrifying. ...
By GrahamF , 1 day ago
-
RE: How to choose Towel Rails for an ASHP
@rob-nezard yes absolutely. Here is the link and a pho...
By GrahamF , 1 day ago
-
@mixergy Thanks for the update, I would appreciate some...
By bontwoody , 1 day ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
Unfortunately I'm not that well connected 😂 ...
By Scalextrix , 2 days ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
It is interesting to see what our new Grant Aerona 290 ...
By GrahamF , 2 days ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
I've never physically seen it, but I seem to recall som...
By cathodeRay , 2 days ago
-
RE: Midea ASHP – how to set weather compensation
I noticed that too and thought the same thing, but then...
By cathodeRay , 2 days ago
-
RE: Ya can’t win! It is S*d’s Law!
@old_scientist If IOF is still running next late spring...
By Toodles , 2 days ago
-
RE: Electricity price predictions
Those of you on Agile will do well tomorrow; there are ...
By Toodles , 2 days ago
-
RE: Who’s Caved and Switched the Heating On Already?
We've been running our Ecodan system, installed in June...
By Sheriff Fatman , 2 days ago
-
Ok. Two schools of thought. The first is to run the ...
By JamesPa , 3 days ago
-
@drei Willing as I am to help, I don't think I'm yet ...
By JamesPa , 3 days ago
-
Selling 5 year old ASHP & Gas Combi Boiler - £590
Selling a 5-year-old Daikin Altherma Hybrid Air Source ...
By Paul G , 3 days ago
-
RE: Is a Valliant Inline 6kW heater a BUS buster?
Much of that is true in principle, but its not likely t...
By JamesPa , 5 days ago