Last seen: Jan 8, 2025
No buffer or low loss header. Two additional pumps. The Ecodan sensors would be a 300mm to the right of the heat meter on the same pipe run on th...
that's what we do.
I've just had a look. The MMSP heat meter is showing 37C flow, 33C return. I think the flow is correct; it corresponds to my reading from the inlet t...
Derek, from what I can see the meter is receiving and recording data; flow rate, flow and return temps and kWh. Just not the right data and the tem...
Derek, the Ecodan controller increments once every 24 hrs and stores month and year to date, so you can't see it working in real time. Melcloud i...
Well the COP is now showing about 6.5, which I still don't believe.
@philip-here. Philip, Welcome fromme. You probably know this but RHI is likely to be a lot more than £5k, although you do pay up front. Most peo...
I'm not sure if this has been posted but it's quite a good analysis of heat pump performance, if you like this sort of thing.
No, still not working. ☹ The energy meter manual is very specific about these sensors and how they are positioned. The FTC6 manual says where t...
@derek-m, Derek, I've had another fiddle round with the MMSP sensor; I've found a suitable copper pipe to attach it to. It seems to be recording ...
I noticed that too; in fact it can produce more than 14kW under some conditions. Having said that, 14kW at a COP of 1.75 is 8kW - I wouldn't want to ...
@derek-m , Derek, thanks, I'll have look at that. Kev
Latest Posts
-
RE: Help me keep the faith with my air source heat pump installation
@jamespa the paving slabs are not cemented down just we...
By AdamK , 1 hour ago
-
@jamespa thanks, I appreciate the offer. For n...
By DREI , 4 hours ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
@transparent what I don't understand about these "rogue...
By Scalextrix , 7 hours ago
-
RE: Who’s Caved and Switched the Heating On Already?
I have 3 women in the house, 2 little ones, so my heati...
By DREI , 9 hours ago
-
@damon thanks. I will do as you suggest. Hopefully I wi...
By bontwoody , 10 hours ago
-
RE: Is a Valliant Inline 6kW heater a BUS buster?
Much of that is true in principle, but its not likely t...
By JamesPa , 1 day ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
@dgclimatecontrol I attach the responses from 2 potenti...
By pash44pump , 1 day ago
-
RE: Midea ASHP – how to set weather compensation
Mostly, I think, but with some caveats. I set the TI...
By cathodeRay , 2 days ago
-
RE: Buffers, hot water and cooling
@dgclimatecontrol thanks, that's helpful.
By JamesPa , 2 days ago
-
RE: Failing heat pump system - seeking thoughts on a rebuild
I realise im overdue an update on my situation. first...
By Cleardene-ashp , 2 days ago
-
RE: Replacing Worcester oil boiler with an ASHP
@toodles thanks. I was told by the engineer that this h...
By JulianC , 2 days ago
-
RE: What crazy nonsense are inverter limits and why are they imposed?
A week later, I'm finally picking up this comment... ...
By Transparent , 2 days ago
-
RE: COP is not the only measure of efficiency
We keep all our TRVs fully open using the whole house a...
By Old_Scientist , 3 days ago
-
RE: Havenwise App Help & Forum Support – Get the Most from Your Heat Pump
I am pleased to say at 4pm today we have added another ...
By ASHP-BOBBA , 3 days ago
-
RE: Renewables & Heat Pumps in the News
To unpack this a little.... 1) how many of us in this...
By Lucia , 4 days ago
-
RE: Vaillant aroTherm Plus 10kW thoughts?
@realevil the fans and fan speed / coil size (height, w...
By ASHP-BOBBA , 4 days ago
-
RE: Mitsubishi Ecodan 11kw Defrosting Issue.
@morgan this can just be done by your sepecilist when t...
By ASHP-BOBBA , 4 days ago
-
RE: Anyone still weathering it out with Agile?
@toodles I guess it all comes down to import averages. ...
By Tim441 , 4 days ago
-
RE: 300 Liter Tank - Do I have to heat it all?
The size of DHW tank affects the anti-legionella cycle....
By Transparent , 4 days ago
