Last seen: Jan 8, 2025
No buffer or low loss header. Two additional pumps. The Ecodan sensors would be a 300mm to the right of the heat meter on the same pipe run on th...
that's what we do.
I've just had a look. The MMSP heat meter is showing 37C flow, 33C return. I think the flow is correct; it corresponds to my reading from the inlet t...
Derek, from what I can see the meter is receiving and recording data; flow rate, flow and return temps and kWh. Just not the right data and the tem...
Derek, the Ecodan controller increments once every 24 hrs and stores month and year to date, so you can't see it working in real time. Melcloud i...
Well the COP is now showing about 6.5, which I still don't believe.
@philip-here. Philip, Welcome fromme. You probably know this but RHI is likely to be a lot more than £5k, although you do pay up front. Most peo...
I'm not sure if this has been posted but it's quite a good analysis of heat pump performance, if you like this sort of thing.
No, still not working. ☹ The energy meter manual is very specific about these sensors and how they are positioned. The FTC6 manual says where t...
@derek-m, Derek, I've had another fiddle round with the MMSP sensor; I've found a suitable copper pipe to attach it to. It seems to be recording ...
I noticed that too; in fact it can produce more than 14kW under some conditions. Having said that, 14kW at a COP of 1.75 is 8kW - I wouldn't want to ...
@derek-m , Derek, thanks, I'll have look at that. Kev
Latest Posts
-
RE: Big Changes Coming to Our Heat Pump System
@editor your engineer's attitude is truly horrifying. ...
By GrahamF , 9 hours ago
-
@cliffhanger - seriously though, I have no idea. What I...
By cathodeRay , 11 hours ago
-
RE: How to choose Towel Rails for an ASHP
@rob-nezard yes absolutely. Here is the link and a pho...
By GrahamF , 11 hours ago
-
@mixergy Thanks for the update, I would appreciate some...
By bontwoody , 13 hours ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
Unfortunately I'm not that well connected 😂 ...
By Scalextrix , 16 hours ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
It is interesting to see what our new Grant Aerona 290 ...
By GrahamF , 19 hours ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
I've never physically seen it, but I seem to recall som...
By cathodeRay , 19 hours ago
-
@jamespa Ours is a Daikin EDLA03 8 kW and the Delta T =...
By Toodles , 20 hours ago
-
RE: Midea ASHP – how to set weather compensation
I noticed that too and thought the same thing, but then...
By cathodeRay , 2 days ago
-
RE: Ya can’t win! It is S*d’s Law!
@old_scientist If IOF is still running next late spring...
By Toodles , 2 days ago
-
RE: Electricity price predictions
Those of you on Agile will do well tomorrow; there are ...
By Toodles , 2 days ago
-
RE: Who’s Caved and Switched the Heating On Already?
We've been running our Ecodan system, installed in June...
By Sheriff Fatman , 2 days ago
-
Ok. Two schools of thought. The first is to run the ...
By JamesPa , 2 days ago
-
@drei Willing as I am to help, I don't think I'm yet ...
By JamesPa , 2 days ago
-
Selling 5 year old ASHP & Gas Combi Boiler - £590
Selling a 5-year-old Daikin Altherma Hybrid Air Source ...
By Paul G , 3 days ago
-
RE: Help me keep the faith with my air source heat pump installation
Er true, it should have read l/hr!
By JamesPa , 3 days ago
-
RE: Is a Valliant Inline 6kW heater a BUS buster?
Much of that is true in principle, but its not likely t...
By JamesPa , 4 days ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
@dgclimatecontrol I attach the responses from 2 potenti...
By pash44pump , 5 days ago
-
RE: Buffers, hot water and cooling
@dgclimatecontrol thanks, that's helpful.
By JamesPa , 5 days ago
