Last seen: May 27, 2025
@luke Your valve is fine, remove the items circled and you will have very good performance. You have plenty of system volume for the heat pump.
A difficult problem, but it is possible to significantly increase the performance without sorting the problem out. However, would you deem it acceptab...
It will be the latter in full control of a single manufacturer's heat pump, We are currently talking to two manufacturers to use their units. It does ...
@luke remove the buffer and it will work properly. The schematic is not a Nibe 2040 configuration. There is no need for the buffer. If you have a blen...
A heat pump is suitable for any property. However, the heating system and control strategy must be designed correctly if it's going to work correctly....
I am working on a heating system controller that will commission it'self, decide what heating system and house the heat pump is attached to, choose a ...
@kev-m You are correct, and I am 3/4 of the way through developing exactly that. It has already been independently tested by Ulster University and as ...
@iancalderbank I do not see why not, part of the reason of having the engineering arm is to help people with existing systems that are not working wel...
Thanks, Mars, To answer the first question, yes, everyone is invited to come and kick the boxes in the training room to see what we do and how we do i...
@iancalderbank I am not accusing you for cutting corners, but if you have Honeywell type valves, someone has. The correct valves are very difficult...
Complain to Nibe, they can be very good depending on the area. If you still have problems, PM me.
@william1066 Correct. Mag filters are not designed for high flow, they have between 4 and 6 right angle bends inside, and the friction loss is huge.
Latest Posts
-
RE: Heat pump solutions and/or installer recommendations for France
Sorry Bravo. I have no installer contacts outside the U...
By Mars , 8 hours ago
-
Have your say in the Renewable Heating Hub Awards
It’s time to celebrate the best (and call out the worst...
By Mars , 8 hours ago
-
RE: Ecodan consuming 100kwh per day in new build!!!
Hey all, I just wanted to put in an update and a...
By anca1808 , 9 hours ago
-
-
RE: 5 Star Service from Havenwise
Our interview with Henri from Havenwise it out:
By Mars , 15 hours ago
-
RE: Mitsubishi cycling while on chilled water output
@iaack yes there's no denying that cold air sinks! I s...
By downfield , 16 hours ago
-
RE: Weather compensated secondary circuits with Biomass
@andycoo that flooring sounds ideal. Extra volume is ...
By Sune , 19 hours ago
-
If you are thinking of heating on the immersion conside...
By JamesPa , 2 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness, I think your best bet would be using ...
By Aventus Eco , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles all depends on asking the right questions! And...
By Tim441 , 2 days ago
-
RE: Commencing on an ASHP Installation Process
I received confirmation this morning that my Greener Ho...
By Sheriff Fatman , 3 days ago
-
@jamespa Thanks for the advice - very helpful. I had al...
By abam48 , 4 days ago
-
RE: Adding battery storage to SolarEdge PV system
@chandykris No need to apologise at all! I forgot to ad...
By Toodles , 5 days ago
-
RE: Say hello and introduce yourself
Yes please do Suggesting a loss in the region...
By JamesPa , 5 days ago
