Last seen: Sep 19, 2024
@newhouse87 I forgot to mention. Have a look at the manual for the controller, there may be an icon on the controller display which indicates if the...
To test if this is the cause of energy consumption, set the temperature down so that the heat pump stops, as you do with the overnight setback, then i...
But at least the applicator is easy to take apart and clean now. 😋
Try lowering the heat pump DHW setting to 50C, and raising the iBoost setting to 60C.
@iantelescope Why TWICE? Did they allow him to rejoin after slapping his wrist? I would suggest that you record the temperatures around your heat ...
I would hope there would be a label fitted somewhere stating the concentration of anti-freeze added, if that is the case. If not contact your installe...
This is an extract from the manual. 7.6.4 To protect the water circuit againstfreezingFrost can damage the system. To prevent the hydraulic componen...
Look through the controller settings and see if the BUH is enabled and the value of any temperature setting.
The rating should be specified somewhere in the manual. What does the manual state about when the BUH should operate?
Is the BUH rated at 6kW and is it enabled?
Did the outside temperature actually go below zero? Do you have a backup or booster heater installed? Check through all the controller settings to...
What are all the readings on the controller telling you? Have any sensors failed?
Latest Posts
-
RE: Powerwall 3 or Myenergi or something else?
Many of those tariffs are simple time of use tariffs, w...
By Temperature_Gradient , 8 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
Yes thats the whole point of the flexis as regards tran...
By JamesPa , 9 hours ago
-
So far as I can tell designing for DT5, which is 'the n...
By JamesPa , 9 hours ago
-
Mitsu PAR-WT60R Wireless Controller - options
I hope I have satisfactorily installed the above wirele...
By DavidAlgarve , 11 hours ago
-
WC curve best discovered by experiment anyway as any lo...
By JamesPa , 16 hours ago
-
RE: Big Changes Coming to Our Heat Pump System
@editor your engineer's attitude is truly horrifying. ...
By GrahamF , 1 day ago
-
RE: How to choose Towel Rails for an ASHP
@rob-nezard yes absolutely. Here is the link and a pho...
By GrahamF , 1 day ago
-
@mixergy Thanks for the update, I would appreciate some...
By bontwoody , 2 days ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
Unfortunately I'm not that well connected 😂 ...
By Scalextrix , 2 days ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
It is interesting to see what our new Grant Aerona 290 ...
By GrahamF , 2 days ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
I've never physically seen it, but I seem to recall som...
By cathodeRay , 2 days ago
-
RE: Midea ASHP – how to set weather compensation
I noticed that too and thought the same thing, but then...
By cathodeRay , 2 days ago
-
RE: Ya can’t win! It is S*d’s Law!
@old_scientist If IOF is still running next late spring...
By Toodles , 2 days ago
-
RE: Electricity price predictions
Those of you on Agile will do well tomorrow; there are ...
By Toodles , 3 days ago
-
RE: Who’s Caved and Switched the Heating On Already?
We've been running our Ecodan system, installed in June...
By Sheriff Fatman , 3 days ago
-
Ok. Two schools of thought. The first is to run the ...
By JamesPa , 3 days ago
-
@drei Willing as I am to help, I don't think I'm yet ...
By JamesPa , 3 days ago
-
Selling 5 year old ASHP & Gas Combi Boiler - £590
Selling a 5-year-old Daikin Altherma Hybrid Air Source ...
By Paul G , 4 days ago
-
RE: Is a Valliant Inline 6kW heater a BUS buster?
Much of that is true in principle, but its not likely t...
By JamesPa , 5 days ago
