Forums

Forums
Members
Clockworks
Activity
 
Notifications
Clear all
Clockworks
@clockworks
Member
Estimable Member
Joined: Jan 22, 2025
Last seen: Apr 26, 2025
Profile Activity
Topics: 2 / Replies: 53
AllTopicsReplies
Reply
RE: Ecodan 6kW - is it "cycling", or normal operation?

Unfortunately Home Assistant only stores detailed historical data for 10 days, then it saves hourly data long term. I need to tweak the system to stor...

7 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan 6kW - is it "cycling", or normal operation?

The maximum flow temp has always been within a degree of what the WC curve has called for. Coldest day here since it was installed was between minus...

7 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan 6kW - is it "cycling", or normal operation?

It's not that I'm chasing low flow temperatures forcthe sake of it, more a case keeping the house at a comfortable temperature in the most economical...

7 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan Legionella cycle - immersion heater problem

Looking at the ASP flow temp, it does indeed switch over to the immersion at 50 degrees. I've spoken to the installer, and they will replace the...

8 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan Legionella cycle - immersion heater problem

I think the switching is because the thermostat in the immersion heater element is switching on and off because the water close to the element is reac...

8 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan 6kW - is it "cycling", or normal operation?

Ah, I see. I hadn't seen that option. The title's a bit misleading- "hourly" meaning "for one hour" rather than what I assumed "hour by hour" I've p...

8 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan 6kW - is it "cycling", or normal operation?

@gary Ah, OK. I find that way of doing it more confusing, as it doesn't show the actual time on the horizontal axis. I get your point about matching...

8 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan 6kW - is it "cycling", or normal operation?

@gary Not sure I understand what you are asking for?

8 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan 6kW - is it "cycling", or normal operation?

Melcloud graph for the last 24 hours. I have the heating scheduled to go off at 20:00 and back on at 23:30. This is because I'm on an EV tariff with c...

8 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan Legionella cycle - immersion heater problem

Ran the Legionella cycle again overnight, with the thermostat on its highest setting. It did eventually reach 60 degrees, after 2 hours. The cycle ...

8 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan Legionella cycle - immersion heater problem

Can't the suppliers, or at least the smart meter network people, tell when local demand is straining the grid by just looking at the supply voltage at...

8 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan Legionella cycle - immersion heater problem

To be fair, the total demand for the period was a maximum of 3kW - the ASHP goes idle while the immersion is running. In contrast, my electric car's...

8 months ago
Forum
Air Source Heat Pumps (ASHPs)
Page 3 / 5
Share:

Join Us!

Podcast Picks

Latest Posts

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →