
Last seen: Aug 15, 2025
Thinking about it, I have already done this (when I tested the individual bytes above 21 ages ago). The results were: data_offset + 22 = 0 (fixed, s...
@derek-m - thanks, will give the bytes 22 and 21 tests a try tomorrow. On a general note, I think it might be worth continuing this in a new thread,...
Well spotted, I missed that. Done, and HA restarted, but unfortunately still get 'outdoor_temperature': 0: 2023-03-14 18:49:17.061 DEBUG (Heat Pump ...
I am sure you are right, but that begs the question of why '*18' in the other code above. Perhaps it is something to do with our old friend zero based...
@derek-m - decided to go straight to 25 ('return bytearray([0x00] * 25)'), no change in message length (or content): Message immediately before chan...
Rant starts! This really is a brilliant example of how irritating python is, and proof of the claim that it is easy to learn is bullshit. By all n...
They are exactly the same as before, with minor value changes for variables that change eg tank_actual_temperature: 2023-03-13 18:47:52.638 DEBUG (H...
I removed the code causing the error straight away, and the remaining code now functions normally as it did before. The code added and then removed is...
Part 5: Dealing with a Major Flaw Before we move on to getting Midea data, a short post to deal with a major flaw that affects both HA and Midea...
Not really, what you see above is what you get, no message body or string at all. I've seen this before. The code can either fail to load at all, ther...
I'm sure you are, the above post was just adding more documentation for me and any others - if there are any - who may be following this thread. ...
Not in the def _body(self) code that has return bytearray(), just in the usual places to get the sensors added and message processed. I've just bee...
- 26 Forums
- 2,136 Topics
- 46.8 K Posts
- 16 Online
- 5,662 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Ecodan & MelCloud scheduling
I put the above question to Mitsu UK at the sme time as...
By DavidAlgarve , 7 hours ago
-
@ashp-bobba interesting insights. We also chatted after...
By Mars , 8 hours ago
-
RE: Why so many sigenergi installer recommendations?
I’ve not come across this brand, but then again I don’t...
By Mars , 8 hours ago
-
Sanity check please. Battery storage and inverter sizing.
I had one installer essentially wanting to install a ti...
By AdamK , 18 hours ago
-
RE: Rodents! A word of warning for heat pump owners
The gaps and holes have reduced on heat pumps over the ...
By dgclimatecontrol , 24 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Forum Handle: EGP01 Manufacturer: Samsung Model: 8K...
By EGP01 , 1 day ago
-
Thanks for the heat geek info. I've fitted my own heat ...
By bontwoody , 1 day ago
-
RE: Does anyone have experience of a smart water meter?
Just to give a sense of scale, I've used the CCW water ...
By Majordennisbloodnok , 1 day ago
-
RE: Powerwall 3 or Myenergi or something else?
We have a Tesla Powerwall 3, recently installed, so I m...
By Old_Scientist , 2 days ago
-
RE: Mitsubishi PAR-WT60R-E Wireless Controller installation
@morgan They have been paired once but it was thought b...
By DavidAlgarve , 3 days ago
-
RE: Isolating the system for a planned power cut
A great many ground-mounted local substation transforme...
By Transparent , 3 days ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
Having bit the bullet and paid £250 for a service, our ...
By Old_Scientist , 4 days ago
-
New heat pump heating system underperforming in Italy... Advice needed!
hi all, first post! I've just renovated a house in sout...
By robinlawrie , 4 days ago
-
RE: Anyone still weathering it out with Agile?
I went to Agile when I had solar installed July last ye...
By NJT , 5 days ago
-
RE: Mitsu Wireless Controller and MelCloud
Well it has now become obvious that the installation of...
By DavidAlgarve , 5 days ago
-
RE: Say hello and introduce yourself
Whilst you're busy installing services (pipes and wires...
By Transparent , 6 days ago
-
RE: New Vaillant aroTherm Plus in black - When will it come to the UK?
@editor I know it was formally announced at Ish the oth...
By PatrickVito , 1 week ago
-
@moman0311 welcome to the forums. I've received your em...
By Mars , 1 week ago
-
RE: Thermostat for Ideal Logic Air with 3 zone support
No harm at all in plumbing it as 3 zones, I would have ...
By JamesPa , 1 week ago
-
RE: ASHP heat output monitoring
@carlo I see there is a discussion in Facebook user gro...
By Tim441 , 1 week ago