Last seen: Dec 3, 2023
Just adding in my details here, or as much as I can remember/look up! Forum Handle: Bob77 Manufacturer: Daikin Model: Altherma 3 R F, 8 kW (ERGA...
I was looking at the Agile Octopus tariff. With underfloor heating it should be possible to get the slab nice and toasty during the cheap overnight pe...
My Daikin Altherma with integrated tank also often shows the water temperature to be below 20C even when there is still hot water coming out. It's not...
What is the size of your house? I have only been collecting numbers for a short while but it looks like my total consumption for December was almost...
Is this different from the “Eco” vs “Comfort” setpoints? My Altherma has two temperature settings, which you can schedule for various times. Eg I ha...
In our recent renovation we put in triple-glazed bifold doors and I have been very impressed. During the recent cold spell there was frost on the outs...
I have a Daikin Altherma LT system and currently the COP is around 2.6-2.7 so it definitely sounds like you have a problem. But having said that, 16kW...
Just to expand on my previous answer, in the recent milder weather with daytime temps of 9-10C and nights staying well above zero the daily usage seem...
I found my Daikin unit coped well with the recent cold spell, even when we had freezing fog the defrost cycles seemed very quick and didn't cause much...
My house is a three-bedroom 1960s end of terrace which we have recently extended on the ground floor. Total area according to the EPC is 117 sq metres...
I have just had my bill for the same period and it was £405. However my electricity usage was around 30% lower than last year, despite the weather bei...
Why must it? Heat loss is proportional to the difference between indoor and outdoor temperatures. Heat loss Q depends on the thermal transmission va...
Latest Posts
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness, I think your best bet would be using ...
By Aventus Eco , 4 hours ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles all depends on asking the right questions! And...
By Tim441 , 5 hours ago
-
RE: Mitsubishi cycling while on chilled water output
I absolutely wouldn't remove the buffer altogether, I'd...
By JamesPa , 12 hours ago
-
RE: Commencing on an ASHP Installation Process
I received confirmation this morning that my Greener Ho...
By Sheriff Fatman , 14 hours ago
-
@jamespa Thanks for the advice - very helpful. I had al...
By abam48 , 2 days ago
-
RE: Weather compensated secondary circuits with Biomass
Hi @andycoo we do an LK 110 standalone weather compensa...
By Sune , 2 days ago
-
RE: Adding battery storage to SolarEdge PV system
@chandykris No need to apologise at all! I forgot to ad...
By Toodles , 2 days ago
-
RE: Say hello and introduce yourself
Yes please do Suggesting a loss in the region...
By JamesPa , 2 days ago
-
As I have reported elsewhere we turned on the cooling o...
By downfield , 3 days ago
-
-
@el3b Hi, sorry to hear that, it is advisable to instal...
By ASHP-BOBBA , 4 days ago
-
RE: Difficult positioning of air source heat pump
@rikiarn Out of intrigue, the thread reads as though Ai...
By Sheriff Fatman , 4 days ago
-
RE: Mitsubishi Ecodan Fails to Heat Water despite temperature drop
@m1kegibson If you are able to access the service me...
By HarriUp , 5 days ago
