Forums

Forums
Sustainable Sidetra...
Safety, Regulations...
Removing Fireplace ...
 
Notifications
Clear all

Removing Fireplace Gas Fitting

 
Safety, Regulations, Tools, Plumbing & DIY Installations
Last Post by Jancold 2 years ago
3 Posts
2 Users
0 Reactions
1,199 Views
RSS
Toodles
 Toodles
(@toodles)
Illustrious Member Contributor
Joined: 3 years ago
Posts: 2096
Topic starter 25/05/2023 4:19 pm  

i have had the gas supply removed from the house and have removed the old gas fire from the living room but am left with the gas supply fitting protruding from the floor (wooden boarding) and would like to remove it flush with the floor. I cannot see any fixing screws in the two holes in the baseplate of the fitting so before I take a hacksaw to it, I thought I would enquire here in case a reader could advise please; how is this fitting held in place? I am attaching a photo of the fitting in case this helps. Regards, Toodles

IMG 5468

 


Toodles, he heats his home with cold draughts and cooks his food with magnets.


   
Quote
Jancold
 Jancold
(@jancold)
Reputable Member Member
Joined: 3 years ago
Posts: 129
27/05/2023 9:15 am  

Posted by: @toodles
↑

i have had the gas supply removed from the house and have removed the old gas fire from the living room but am left with the gas supply fitting protruding from the floor (wooden boarding) and would like to remove it flush with the floor. I cannot see any fixing screws in the two holes in the baseplate of the fitting so before I take a hacksaw to it, I thought I would enquire here in case a reader could advise please; how is this fitting held in place? I am attaching a photo of the fitting in case this helps. Regards, Toodles

-- Attachment is not available --

 

Hi, if you tease back the carpet there should be a flange with screws. Remove them and lift the fitting and there is a compression fitting holding the pipe. Anyway that is if it is like mine! cheers

 


Daikin 6Kw ASHP.
MG4 EV
1926 Semi with loft and wall cavity insulation, all radiator.


   
ReplyQuote
Jancold
 Jancold
(@jancold)
Reputable Member Member
Joined: 3 years ago
Posts: 129
27/05/2023 8:50 pm  

A further thought if you are not removing the pipe is to fit a stop end or you will get a smell of gas.


Daikin 6Kw ASHP.
MG4 EV
1926 Semi with loft and wall cavity insulation, all radiator.


   
ReplyQuote
Forum Jump:
  Previous Topic
Next Topic  

Currently viewing this topic 1 guest.



Share:

Join Us!

Login   Register

Podcast Picks

Latest Posts

Members Online

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →