Vaillant Arotherm Plus
Vaillant Arotherm Plus or rather Vaillant Aro Horror plus nightmare
installation content: DHW cylinder, Hydraulic Station 97/6, MHT 150, VRC720, AI and VR71.
what a mistake to make, first day straight F.1100, then either runs DHW or heating but never together, happily passes all tests, even immersion test but after restart gives me F.1100. who from vaillant come up with that stupid idea? why would immersion heater blow up , isn't it easier to put a fuse , clever engineering or playing ? On top of it, pressure goes up / down whenever it feels like. what a piece if metall-plastic waste.
i should never ever buy germany made again, their time is vorbei.
- 26 Forums
- 2,378 Topics
- 53.9 K Posts
- 488 Online
- 6,060 Members
Join Us!
Worth Watching
Latest Posts
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles You are lucky you don’t have nosy and inter...
By Papahuhu , 1 minute ago
-
RE: Radiator sizing sanity check
@jamespa The flow temp is a tricky one, bec...
By Papahuhu , 20 minutes ago
-
RE: Cascade 2x Grant Areona 10kw ASHP - Ongoing setup issues
Either complete Bow Locks or at best a marginal effect....
By JamesPa , 33 minutes ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
I had a look and it looks complicated to me! There may ...
By cathodeRay , 38 minutes ago
-
Hi all I’m looking to get some insight on what others...
By Renewables345 , 47 minutes ago
-
RE: The Great British Heat Pump Owner Persona Survey: Let's Build Our Archetype!
@mosibi, go on then, complete the survey. Let's get the...
By Mars , 1 hour ago
-
RE: Water Hammer After Heat Pump Install
@jaynieq I wish you luck with this one. I think the ma...
By JamesPa , 3 hours ago
-
RE: Grant ASHP 17.5 kw. weather curve
All sounds good and like you know what you are doing. R...
By JamesPa , 4 hours ago
-
RE: Optimum new build house design for Heat Pump
From first principles I would say: Definitel...
By JamesPa , 19 hours ago
-
RE: Weather compensation- why you should use it
As good a place as any to drop this video:/p>
By Mars , 22 hours ago
-
RE: Forum updates, announcements & issues
@transparent D'Oh - I did look before I posted but I mi...
By dr_dongle , 23 hours ago
-
Compatibility with Samsung AE080RXYDEH
I am new to all this. We have a SamsungAE080RXYDEH that...
By John999 , 23 hours ago
-
RE: New Fogstar 15.5kWh upright solution
@batpred Maybe you should buy your additional batter...
By Bash , 1 day ago
-
RE: Data Accuracy Problem: Daikin 8kW Heat Pump's Onecta App vs MMI Power Consumption
@nursethescreens Yes, comfort and happiness of the fami...
By Toodles , 1 day ago
-
RE: Connecting Growatt SPH5000 over wired ethernet rather than wireless
Thanks folks. I had tried googling an ethernet lab adap...
By z8lccda , 2 days ago
-
RE: Changing from 4-port buffer to volumizer
@toodles I'm not concerned that the behaviour is not no...
By Andy1618 , 2 days ago
-
-
RE: Setback savings - fact or fiction?
I agree, and I think there are two things in play here....
By cathodeRay , 2 days ago
-
RE: Help needed with Grant Aerona 3 issues
First time posting so bear with me. Some bits that have...
By Adamp , 3 days ago
-
RE: Mitsu PUHZ-SW120YHA + EHSC-VM20Uk - Performance
All understood. Obviously its a bit house de...
By JamesPa , 3 days ago
