ASHP and Solar Panel retrofit under the HUG 2 scheme
@Toodles Indeed. I'm lucky to have the ability to install my own CE systems (not Gas boilers), Electrical work (Part P aside), and general building due to buying some old properties in the past. ASHP are new to me in terms of 'dedicated' systems. Although I do have a little experience with HVAC. It's just a case of familiarisation of heat pump cylinders, buffer tanks and so forth and transferring my CE knowledge to Heat Pump technology.
@ianmk13 From my efforts so far, no one appears to have a spec, a plan, or to be honest any idea of the schedule. I'm currently at the state of awaiting approval by a formative signature on a piece of paper. Afterwhich, I imagine I have to commit. Its at that point I'm hoping to establish what spec I'm having, the exact equipment being installed, and more importantly how they're going to pipe the flow and return from the HP to the Cylinder.
Finally, the install is complete.
Heap Pump is a Grant Aerona 3 6.5KW (so uses the Grant propriety controller)
What I know so far:
It's a Chofu HP with restrictions that requires Modbus to access.
It heats up and warms the house
End.
What I'd like to know:
How to fully use the full potential of the system and not rely on the basic settings of the controller
Understand the restrictions Grant appear to have implemented
Get more heat for less money
Not get bogged down in computer protocols to achieve the above
- 26 Forums
- 2,136 Topics
- 46.8 K Posts
- 32 Online
- 5,662 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Rodents! A word of warning for heat pump owners
@tim441 Or as they didn’t quite say in the space travel...
By Toodles , 2 hours ago
-
RE: Mitsu Wireless Controller and MelCloud
Update: I have found that the contractor had changed on...
By DavidAlgarve , 14 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
@editor Hi Mars, We have just installed a Grant Aerona...
By GrahamF , 14 hours ago
-
RE: Sanity check please. Battery storage and inverter sizing.
There are MCS guidelines about how close to the edge/ri...
By Old_Scientist , 18 hours ago
-
RE: Balancing financial efficiency and comfort using the Octopus Cosy tariff
I estimated our usage on the following basis. The mos...
By Old_Scientist , 19 hours ago
-
RE: Why so many sigenergi installer recommendations?
It’s a really simple answer, GivEnergy. Installers ...
By SAEnergy , 23 hours ago
-
@editor Something changed in this last 12 months, they ...
By ASHP-BOBBA , 2 days ago
-
RE: Ecodan & MelCloud scheduling
I put the above question to Mitsu UK at the sme time as...
By DavidAlgarve , 2 days ago
-
Thanks for the heat geek info. I've fitted my own heat ...
By bontwoody , 3 days ago
-
RE: Does anyone have experience of a smart water meter?
Just to give a sense of scale, I've used the CCW water ...
By Majordennisbloodnok , 3 days ago
-
RE: Powerwall 3 or Myenergi or something else?
We have a Tesla Powerwall 3, recently installed, so I m...
By Old_Scientist , 4 days ago
-
RE: Mitsubishi PAR-WT60R-E Wireless Controller installation
@morgan They have been paired once but it was thought b...
By DavidAlgarve , 5 days ago
-
RE: Isolating the system for a planned power cut
A great many ground-mounted local substation transforme...
By Transparent , 5 days ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
Having bit the bullet and paid £250 for a service, our ...
By Old_Scientist , 6 days ago
-
New heat pump heating system underperforming in Italy... Advice needed!
hi all, first post! I've just renovated a house in sout...
By robinlawrie , 6 days ago
-
RE: Anyone still weathering it out with Agile?
I went to Agile when I had solar installed July last ye...
By NJT , 7 days ago
-
RE: Say hello and introduce yourself
Whilst you're busy installing services (pipes and wires...
By Transparent , 1 week ago
-
RE: New Vaillant aroTherm Plus in black - When will it come to the UK?
@editor I know it was formally announced at Ish the oth...
By PatrickVito , 1 week ago
-
@moman0311 welcome to the forums. I've received your em...
By Mars , 1 week ago
-
RE: Thermostat for Ideal Logic Air with 3 zone support
No harm at all in plumbing it as 3 zones, I would have ...
By JamesPa , 1 week ago