Recent Posts

| Forums | Topics

Page 14 / 70 Prev Next

Posts with their shortened content
	RE: What is the Heat Geek Guarantee? By Mars, 4 days ago Forum Air Source Heat Pumps (ASHPs)
	@judith, I’m with you on Heat Geek, but there really does seem to be a lack of transparency. I’ve had several long email and DM exchanges with Adam on this, and I’ve pointed out that nowhere on the He...
	RE: Midea ASHP – how to set weather compensation By cathodeRay, 4 days ago Forum Air Source Heat Pumps (ASHPs)
	On the OAT, what you say is true, it is the value the system uses to set the leaving water temperature via the weather compensation curve, which I thought made sense, but @jamespa has done some work b...
	RE: What is the Heat Geek Guarantee? By Judith, 4 days ago Forum Air Source Heat Pumps (ASHPs)
	This is a very valuable post which I wish had existed before we ordered our ashp. We found our installer via the Heatgeek web site, as the nearest Elite. He did a brilliant job but it wasn’t via Heatg...
	RE: Midea ASHP – how to set weather compensation By Tasos, 4 days ago Forum Air Source Heat Pumps (ASHPs)
	@benson I believe, noting the data in 16 hourly intervals should be more than enough for the purpose we are discussing (after the system has been working for some days). That is if the user is willing...
	RE: Midea ASHP – how to set weather compensation By benson, 4 days ago Forum Air Source Heat Pumps (ASHPs)
	I don’t get how you’d do this effectively without something collecting the data and plotting it on a graph, over time. Snapshot data manually read from the control panel every now and again is surely ...
	RE: Midea ASHP – how to set weather compensation By Tasos, 4 days ago Forum Air Source Heat Pumps (ASHPs)
	@pash44pump My opinion on data collection is the following: Regarding OAT, I would use the pump's sensor, since it is this value that the system uses to control outflow water temperature. Regarding, I...
	RE: Midea ASHP – how to set weather compensation By cathodeRay, 4 days ago Forum Air Source Heat Pumps (ASHPs)
	I think the setup I have could use wireless sensors, the mini-pc has a wireless card, but being paranoid about some joker dialing my DHW temp up to 90 degrees I chose to go down the wired route. It's ...
	RE: Midea ASHP – how to set weather compensation By benson, 4 days ago Forum Air Source Heat Pumps (ASHPs)
	@cathoderay is one possible slight advantage with the HA setup the ability to integrate a wireless smart temp sensor? I've also got an auto adapt of sorts via an automation to lower the curve if the I...
	RE: Midea ASHP – how to set weather compensation By cathodeRay, 4 days ago Forum Air Source Heat Pumps (ASHPs)
	HA does work for some, but I found it over-complicated, a bit like using a sledge hammer to crack a nut. I do in fact still have it installed, but my primary monitoring is done over modbus (Midea and ...
	RE: Midea ASHP – how to set weather compensation By benson, 4 days ago Forum Air Source Heat Pumps (ASHPs)
	@pash44pump at the time I was using the homely installer dashboard, as this is what I had initially installed as the controls. This provided plots of all of the different running parameters on an easy...