Recent Posts
 
Notifications
Clear all

Recent Posts

 |  Forums  |  Topics
Page 5 / 60
Posts with their shortened content
Toodles RE: Solar Power Output – Let’s Compare Generation Figures  

By Toodles, 4 days ago

  Oh, and I might add that each panel has its’ own Enphase IQ7A microinvertor. Toodles.
Toodles RE: Solar Power Output – Let’s Compare Generation Figures  

By Toodles, 4 days ago

  @tim441 Bearing in mind my 8.1 kWp. array is not ideally orientated and that I do have some issues with part-time shading, my production is fairly respectable I think. I have 5 panels on the house roo...
RE: Mitsubishi cycling while on chilled water output  

By JamesPa, 4 days ago

  I absolutely wouldn't remove the buffer altogether, I'd convert it to a volumiser. My suggestion above was intended to convey that sorry for not being clear. Even that is a bit too small for margin. ...
RE: Solar Power Output – Let’s Compare Generation Figures  

By Tim441, 4 days ago

  @toodles June figures confirm my GivEnergy app AND portal both returning incorrect data 😬😢 GIVENERGYImport 579.1Export 829.3Solar 747.75 METER readings taken early on 1st june/1st Jul...
downfield RE: Mitsubishi cycling while on chilled water output  

By downfield, 4 days ago

  @jamespa I am not in principle against removing the buffer - my main concern is system volume. The Jaga rads hold very little water - less than a litre each and so with the pipework only perhaps 20 li...
Toodles RE: Solar Power Output – Let’s Compare Generation Figures  

By Toodles, 4 days ago

  June proved to be quite respectable for solar production; it beat June 2024 but was less than 2023. Attachment : IMG_6483.jpeg Attachment : IMG_6484.jpeg Attachment : IMG_6485.jpeg ...
RE: Commencing on an ASHP Installation Process  

By Sheriff Fatman, 4 days ago

  I received confirmation this morning that my Greener Home Reward from my mortgage provider has been approved, so the additional £2,000 of support towards the cost of the installation (on top of the BU...
RE: Mitsubishi cycling while on chilled water output  

By JamesPa, 4 days ago

  I have seen this discussion (not exactly this article) before and the argument for a 3 port buffer over a 4 port buffer does indeed make sense to me. However nothing in the article addresses the quest...
downfield RE: Mitsubishi cycling while on chilled water output  

By downfield, 4 days ago

  On the buffer tank issue, I use Perplexity more and more as a search engine and I asked it whether a 3 pipe buffer would be a good compromise for both heating and cooling. It led me to an interesting ...
downfield RE: Mitsubishi cycling while on chilled water output  

By downfield, 4 days ago

  Thanks - I will try this when the loft temp goes down a bit!
downfield RE: Mitsubishi cycling while on chilled water output  

By downfield, 4 days ago

  Thanks - I will check this.
Page 5 / 60

 

 

 

Share:

Join Us!

Latest Posts

Members Online

 No online members at the moment