Forums

Forums
Sustainable Sidetra...
DIY
Rising Damp – Produ...
 
Notifications
Clear all

Rising Damp – Production Recommendation

 
DIY
3 Posts
3 Users
3 Reactions
904 Views
RSS
Mars
 Mars
(@editor)
Illustrious Member Admin
Joined: 4 years ago
Posts: 3333
Topic starter 06/05/2024 9:30 am  

We've noticed some rising damp around a window after this winter. I've looked up solutions, and it typically involves removing the plasterboard and applying treatments. It's not something I'm keen on tackling at the moment. I vaguely remember seeing a product a while ago that involves sanding off the layer of paint in the affected area, applying it, and then painting over it again. Has anyone used a product like this that they can recommend?

Buy Bodge Buster – Homeowner Air Source Heat Pump Installation Guide: https://amzn.to/3NVndlU
From Zero to Heat Pump Hero: https://amzn.to/4bWkPFb

Subscribe and follow our Homeowners’ Q&A heat pump podcast


   
Quote
 AllyFish
(@allyfish)
Noble Member Contributor
Joined: 3 years ago
Posts: 490
07/05/2024 9:47 am  

Hi @editor, a lot of damp is mis-diagnosed as rising. Often it is penetrating damp through the fabric, common in older solid wall properties in the corners of rooms and around (ironically) well sealed airtight windows where  lower local indoor air temperatures can reach dew point and form moisture on the adjacent walls promoting mould growth. Can also be damp from excess internal moisture that is condensing on cooler external walls. Be wary of applying internal or external damp treatments - they can prevent the fabric of the building from breathing and naturally drying. I would recommend a specialist check moisture levels for you and recommends a treatment. Have you high humidity inside the room where there's damp?


   
👍
1
ReplyQuote
Majordennisbloodnok
 Majordennisbloodnok
(@majordennisbloodnok)
Noble Member Moderator
Joined: 4 years ago
Posts: 869
07/05/2024 10:55 am  

Yet another topic I'm not an expert in. Nonetheless, there is something that might be of interest or use.

Some friends of ours had a bit of a damp problem in one room of their Victorian house and spent some significant amount of time and effort researching and getting advice. A lot of that advice involved removal of plaster and injection of a chemical damp proof course at considerable expense. One surveyor, however, who happened to have a lot of experience with heritage buildings and had done a fair bit of work with the National Trust felt the answer to their issue lay in working with the way the building was originally designed. The suggestion given was that they should remove the soil from next to the outside face of the offending wall and then fill that trench with gravel so as to provide quick drainage. That is what they did and the damp problem disappeared.

I hasten to add that was a different property and perhaps even a different problem so I'm not suggesting a solution per se. However, it does feel to me that a bit of work minimising the ability for the moisture to get into your wall instead of some barrier to stop the moisture moving from your wall into your plaster might be a more productive line of enquiry.

105 m2 bungalow in South East England
Mitsubishi Ecodan 8.5 kW air source heat pump
18 x 360W solar panels
1 x 6 kW GroWatt battery and SPH5000 inverter
1 x Myenergi Zappi
1 x VW ID3
Raised beds for home-grown veg and chickens for eggs

"Semper in excretia; sumus solum profundum variat"


   
👍
2
ReplyQuote



Forum Jump:
  Previous Topic
Next Topic  
Share:

Join Us!

RHH Awards

👉 Vote for “Heat Pump of the Year”

👉 Vote for “Best Manufacturer Customer Support”

👉 Nominate “Heat Pump Installation of Year”, “Best New Tech or Innovation” or “Turkey of the Year” here!

Latest Posts