Last seen: Jan 8, 2025
agree with the above.
I agree with your point about off = unrestricted. When my LWT went up to 48, it was in the process of raising the IAT from 21.5 to 22.5. The set po...
I don't think so. It takes about an hour or so to heat from mid 30s to 48.5. I would have though any residual peak from the HW would be long gone? B...
Agreed. It didn't do it immediately; in fact for the first couple of days it looked the same as before. But yesterday after the HW cycle it sneaked i...
No suggestions yet but your AA settings are now the same as mine. What I can see happening in my system is that the IAT is varying between the setpoi...
@Derek-m The former I think. AA pushes the lower end up and the higher end is constrained by my 43 deg upper limit. If I remove the upper limit, th...
Or it may have an in-built one? One thing I notice is that in milder temperatures my LWT doesn't vary much. I've limited my LWT to a maximum of 43...
A typically pro-heatpump Guardian article but most of the data used in the study is from A2A systems.
I don't know but I'd like to. I may try some experiments as it's easy for me to view the results using the monitoring data. If anyone wants to sugge...
Interesting. That explains why the IAT is always above the set point.
I was going to start a new topic but I'll join this one if that's OK. I've been running AA for about a year and am pretty happy with it. It uses abo...
@mcwatson1974 can you explain how you normally use the system? What's on the FTC screen, how do you set the zones and switch the heating on and off...
- 26 Forums
- 2,158 Topics
- 47.4 K Posts
- 26 Online
- 5,736 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Replacing Worcester oil boiler with an ASHP
@toodles thanks. I was told by the engineer that this h...
By JulianC , 11 minutes ago
-
RE: Is a Valliant Inline 6kW heater a BUS buster?
@guydeb The guidelines are possibly written to be defin...
By Toodles , 2 hours ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
Yes Octopus only have the £9 a month service plan for t...
By NJT , 2 hours ago
-
RE: Who’s Caved and Switched the Heating On Already?
@allyfish Dogs have owners - Cats keep staff. You are o...
By Toodles , 2 hours ago
-
RE: What crazy nonsense are inverter limits and why are they imposed?
A week later, I'm finally picking up this comment... ...
By Transparent , 2 hours ago
-
RE: COP is not the only measure of efficiency
We keep all our TRVs fully open using the whole house a...
By Old_Scientist , 8 hours ago
-
RE: Midea ASHP – how to set weather compensation
I think it is a bug in the code, it comes on even when ...
By cathodeRay , 22 hours ago
-
RE: Havenwise App Help & Forum Support – Get the Most from Your Heat Pump
I am pleased to say at 4pm today we have added another ...
By ASHP-BOBBA , 24 hours ago
-
RE: Buffers, hot water and cooling
@jamespa Your reasonably close! Especially with warmer ...
By dgclimatecontrol , 1 day ago
-
RE: Renewables & Heat Pumps in the News
To unpack this a little.... 1) how many of us in this...
By Lucia , 1 day ago
-
RE: Vaillant aroTherm Plus 10kW thoughts?
@realevil the fans and fan speed / coil size (height, w...
By ASHP-BOBBA , 2 days ago
-
RE: Mitsubishi Ecodan 11kw Defrosting Issue.
@morgan this can just be done by your sepecilist when t...
By ASHP-BOBBA , 2 days ago
-
RE: Anyone still weathering it out with Agile?
@toodles I guess it all comes down to import averages. ...
By Tim441 , 2 days ago
-
RE: 300 Liter Tank - Do I have to heat it all?
The size of DHW tank affects the anti-legionella cycle....
By Transparent , 2 days ago
-
RE: Heat Pump SCOPs – The Truth Might Not Be What You Think
@scalextrix Name plate capacity
By HCas , 2 days ago
-
RE: Solar Thermal DHW and ASHP
I was originally contemplating a solar thermal installa...
By jamespetts , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
My system installed in July 2024 has produced 6.4mWh in...
By jamespetts , 2 days ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
@judith thanks for your suggestions. Starting from col...
By GrahamF , 3 days ago
-
RE: Inventor (Midea) Heat Pump short cycling advice
I switched to "fan coil mode" to be able to set water t...
By immunity , 3 days ago