Last seen: Sep 19, 2024
Things do stay the same. My wife still hates the cold. 🙄
I would suggest that you check where each pump is connected and feeding. I suspect that the right-hand one may be for your DHW, since it appears to be...
Does it have a nameplate?
@sarah It would appear that you have 3 water pumps and what could possibly be a plate heat exchanger. I would need to be able to read the model num...
There will be an air release valve somewhere, but I'm not certain where it will be located, normally in the highest section. I suggest that you Google...
@sarah I would expect the flow rate to be greater than 13 litres per minute at a pump speed of 5, is your water pump actually wired to the heat pump...
@cathoderay Thanks for the response, which appears to close one avenue of investigation. I have attached a spreadsheet detailing the data that I thi...
@cathoderay I forgot to add the code in the previous post. from homeassistant.const import ( CONF_NAME, CONF_TOKEN, CONF_HOST, ...
@sarah I would suggest that you watch the following video, which details how to check and change the pump speed. Before making any changes I would a...
Looking at the temperature gauges in the photo's, it would appear that the water is going into the UFH at approximately 28C, and coming out at approxi...
In the _init_.py there is the following code which imports data from HA. I have a feeling that HA contains a list of the sensors etc. from which data ...
@cathoderay I carry out day trading on the stock market, so often have lots of free time when nothing exciting is happening, so you don't have to co...
Latest Posts
-
RE: Mitsu PAR-WT60R Wireless Controller - options
How it does it's job is something of a mystery although...
By Abernyte , 10 minutes ago
-
RE: Big Changes Coming to Our Heat Pump System
As a mere consumer I wholeheartedly agree with both of ...
By JamesPa , 13 minutes ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
The refresh time of climate-related curves in heating m...
By Tasos , 16 minutes ago
-
@editor Searching for anything in the Daikin Installati...
By Toodles , 16 minutes ago
-
RE: MCS certificate SCOP vs real-world performance
MCS:3.65 Reported by Vaillant: 3.96 (heating only); 3....
By JamesPa , 2 hours ago
-
RE: Powerwall 3 or Myenergi or something else?
Yes I was thinking of outdoor, IP65 batteries with buil...
By Temperature_Gradient , 4 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
Water pump will certainly make a hum (which could conce...
By JamesPa , 7 hours ago
-
@jamespa Thanks. Yeah any adjustments Ive made at pr...
By cliffhanger , 7 hours ago
-
RE: How to choose Towel Rails for an ASHP
@rob-nezard yes absolutely. Here is the link and a pho...
By GrahamF , 2 days ago
-
@mixergy Thanks for the update, I would appreciate some...
By bontwoody , 2 days ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
Unfortunately I'm not that well connected 😂 ...
By Scalextrix , 2 days ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
It is interesting to see what our new Grant Aerona 290 ...
By GrahamF , 2 days ago
-
RE: Midea ASHP – how to set weather compensation
I noticed that too and thought the same thing, but then...
By cathodeRay , 3 days ago
-
RE: Ya can’t win! It is S*d’s Law!
@old_scientist If IOF is still running next late spring...
By Toodles , 3 days ago
-
RE: Electricity price predictions
Those of you on Agile will do well tomorrow; there are ...
By Toodles , 3 days ago
-
RE: Who’s Caved and Switched the Heating On Already?
We've been running our Ecodan system, installed in June...
By Sheriff Fatman , 3 days ago
-
Ok. Two schools of thought. The first is to run the ...
By JamesPa , 4 days ago
-
@drei Willing as I am to help, I don't think I'm yet ...
By JamesPa , 4 days ago
-
Selling 5 year old ASHP & Gas Combi Boiler - £590
Selling a 5-year-old Daikin Altherma Hybrid Air Source ...
By Paul G , 4 days ago
