Help me keep the faith with my air source heat pump installation

AdamK · 2025-03-29T13:05:20Z

i knew when setting out on this road it would be a challenge i just didnt know how much of one it would be. after having many quotes some i couldnt fathom why they were so high i thought id sorted an installer. problem is they are 72miles away so first issue was doing a remote heat loss which has been back and forth several times to get it more or less correct, but still have one room thats 2m2 smaller than what i measured. anyway the next issue was getting the 28mm primaries in before the new kitchen ceiling goes in. they sent a plumber that proceeded to bugger the job up as the wall sleeve kit hadnt been supplied to him. so sent him on his way. was promised the sleeve kit the next day and i said my plumber could fit it to save them sending an engineer. next day no kit. add to this all the mods im having to do to pipe work to maximise efficiency and im seeing why the take up is tiny in the UK. im not naming the company as they are a recommended one and have apparently done good work else where but maybe thats in there local area. i know living in Boston creates its own issues being miles from any proper trades so if someone asked me would i recommend getting a heat pump in my area id have to say no. theres just not enough skilled trades where i live.

Page 10 / 10 Prev

Air Source Heat Pumps (ASHPs)

Last Post by AdamK 3 minutes ago

109 Posts

12 Users

31 Reactions

4,227 Views

RSS

AdamK

(@adamk)

Reputable Member Member

Joined: 7 months ago

Posts: 111

Topic starter 18/09/2025 6:40 pm

@jamespa installer said today "Yeah unfortunately thay is not going to help with vibration. They aren't anti vibration clips and/or the pipes been wrapped or insulated." after seeing part of the 28mm runs that i could find in my photo's, i have since explained that the pipes are insulated and this pic just shows part of the run of 28mm that wasnt yet finished.