Recent Posts

| Forums | Topics

Page 1 / 72 Next

Posts with their shortened content
	RE: Mixergy Tank Failure By JamesPa, 20 minutes ago Forum Domestic Hot Water & Cylinders
	OOh thats nasty. Unless your installer overpressurised it during installation, which is only really possible if you have very high pressure mains >>6bar, then its almost certainly a manufactur...
	RE: Humming sound on new install. By JamesPa, 28 minutes ago Forum Air Source Heat Pumps (ASHPs)
	@adamk Yes, Live Monitor on the 'HPAI' (not the Sensocofort) tells you the flow rate. It also tells you lots of other very useful things and is worth getting to know! Unlikely to be this unless ther...
	Mixergy Tank Failure By bontwoody, 3 hours ago Forum Domestic Hot Water & Cylinders
	Hi. I had my Mixergy tank fitted nearly three years ago and on the whole I've been very happy with it. A week or two ago we noticed a small leak on the floor beneath the piping. Initially I thought it...
	RE: Humming sound on new install. By Tim441, 3 hours ago Forum Air Source Heat Pumps (ASHPs)
	Just a thought... can you check flow rates? If the flow rates are higher than necessary it can cause significant noise & vibration. We had that on our new install 5 years ago. Solution in our cas...
	RE: Humming sound on new install. By JamesPa, 12 hours ago Forum Air Source Heat Pumps (ASHPs)
	Well at least its well insulated, but Im not sure that insulation is fit for external use. Others may recognise it as either internal or external grade insulation, I thought external grade usually ha...
	RE: Is a Valliant Inline 6kW heater a BUS buster? By JamesPa, 12 hours ago Forum Air Source Heat Pumps (ASHPs)
	Much of that is true in principle, but its not likely to be revolutionary. You are also correct about the fact that heat pumps don't reach theoretical efficiency, in fact they are almost all within a...
	RE: Humming sound on new install. By ASHP-BOBBA, 13 hours ago Forum Air Source Heat Pumps (ASHPs)
	if you fix the thing that is supposed to be free moving to absorb vibration to will pass the vibration down the line, flexes need to be free floating either behind the unit, to the side or through the...
	RE: Humming sound on new install. By ASHP-BOBBA, 13 hours ago Forum Air Source Heat Pumps (ASHPs)
	sorry i needed to be more clear, is the pink the flexes? Attachment : 11890-IMG1161.jpeg
	RE: Humming sound on new install. By ASHP-BOBBA, 13 hours ago Forum Air Source Heat Pumps (ASHPs)
	Levels don't look terrible and it appears they cast concrete bases so i would have through these would be level? so the wall clips are holding the flex to the wall?
	RE: Is a Valliant Inline 6kW heater a BUS buster? By Temperature_Gradient, 14 hours ago Forum Air Source Heat Pumps (ASHPs)
	Many of the R290 models have only launched in the last year or two, some manufacturers are still in the process of launching their ranges, so these are all first generation technology. Sure they work ...
	RE: Humming sound on new install. By AdamK, 14 hours ago Forum Air Source Heat Pumps (ASHPs)
	Ok took some pics. It’s seems level one end front to back, but everywhere else it’s out, like the casing is twisted. Where is the best place to measure? Also the flexis are in the section in the photo...
	RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off? By pash44pump, 16 hours ago Forum Air Source Heat Pumps (ASHPs)
	@dgclimatecontrol I attach the responses from 2 potential ASHP servicing companies when asked what the service would cover. One costs £294 the other £180. Which one should cost more - just on what is ...