Octopus tariffs - API & choosing best tariff
one of the reasons its harder for me to take full advantage of periods of lower time of use tariffs is that my Givenergy Gen1 inverter can only charge/discharge from batteries at 2.6kwh. Gen2 and the new All in One offer much better options. My ASHP is a large one ... so again needs bigger throughput to take full advantage. its not worth upgrading as the system works fine and Tracker import with Fixed export is giving a very fair cost.
Overall very happy with the setup - installed 2021 .... before battery & material prices took off.
Listed Grade 2 building with large modern extension.
LG Therma V 16kw ASHP
Underfloor heating + Rads
8kw pv solar
3 x 8.2kw GivEnergy batteries
1 x GivEnergy Gen1 hybrid 5.0kw inverter
Manual changeover EPS
MG4 EV
@tim441 I see that tomorrow (Sunday 30th. July) Octopus Agile has a peppering of very cheap and some negative priced periods available. Guess who has just set up their Eddi to charge the DHW and also set the Tesla app to some negatively charged half hours to fill the battery?! Regards, Toodles
Toodles, he heats his home with cold draughts and cooks his food with magnets.
@toodles yes...very nice! presumably wind is blowing nicely ..
Tracker is down at 12.06p as all day rate so I'm not unhappy with that. My Gen1 Givenergy inverter can only charge batteries at 2.6kwh.
Charging batteries as well as EV ... and heating hot tub!
Key question will be what happens over the winter - I'm hopeful that barring black swans out of Russia/Ukraine/China etc we will see overall wholesale prices well under standard rates
Listed Grade 2 building with large modern extension.
LG Therma V 16kw ASHP
Underfloor heating + Rads
8kw pv solar
3 x 8.2kw GivEnergy batteries
1 x GivEnergy Gen1 hybrid 5.0kw inverter
Manual changeover EPS
MG4 EV
@tim441 No hot tub here or EV for that matter but, tomorrow’s laundry is running a day earlier and the oven is now on a an autoclean cycle! The battery is charging nicely and DHW is up to temperature. I have never been a gambler - that is until Agile came along.;-))) Regards, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
I think I was ‘spoilt’ yesterday/today as tomorrow’s half hourly slots are rather more expensive! I have instructed Eddi not to ‘spend’ more than 10 pence per kW/h to heat the water tomorrow! Ah well, you win some…. (Of course this is still very a good rate by today’s reckoning, but Ill leave any PV output to export where it can as this still rewards me at 15p per kW/h.!) Regards, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
Again, tomorrow (Aug. 3rd.) there are some very cheap half hour slots to avail oneself of for heating water / charging battery type purposes; my DHW will cost less than 10 pence for a day’s supply 😉 Regards, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
Having heard about Octopus Energy introducing ‘Power Ups’ in a trial area at present, I yhought others might like to know more here: https://octopus.energy/press/free-whizz-octopus-launches-power-ups-free-energy-when-the-sun-shines-and-the-wind-blows/
Regards, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
-
Octopus tariffs - a quick comparison
2 weeks ago
-
Who's your electricity provider and what's your tariff?
3 weeks ago
-
Agile: average import cost vs other tariffs?
5 months ago
-
Switching tariff in Winter? or stick year round?
1 year ago
-
Confusion over Octopus Tariffs
1 year ago
Currently viewing this topic 1 guest.
- 26 Forums
- 2,171 Topics
- 47.8 K Posts
- 50 Online
- 5,744 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Testing new controls/monitoring for Midea Clone ASHP
This is to be expected, isn't it?
By Tasos , 10 minutes ago
-
RE: Preparing for 2nd winter in new build house.
Ground and 1st floor UFH is in screed. 2nd floor overla...
By sbm74 , 25 minutes ago
-
RE: Boxt Heat Pump Installation Experience
Welcome to the forums. Was there any formal in-person...
By Mars , 2 hours ago
-
RE: Say hello and introduce yourself
@transparent Morning. Just put a lengthy post on the AS...
By sbm74 , 3 hours ago
-
RE: Big Changes Coming to Our Heat Pump System
@old_scientist 3. Some pipe work is ...
By GrahamF , 3 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
@jamespa if I remember the insulation has a notch cut i...
By AdamK , 12 hours ago
-
RE: MCS certificate SCOP vs real-world performance
That may be contributing to lower than expected SCOP. ...
By JamesPa , 13 hours ago
-
-
RE: Mitsu PAR-WT60R Wireless Controller - options
How it does it's job is something of a mystery although...
By Abernyte , 20 hours ago
-
RE: Powerwall 3 or Myenergi or something else?
Yes I was thinking of outdoor, IP65 batteries with buil...
By Temperature_Gradient , 1 day ago
-
@jamespa Thanks. Yeah any adjustments Ive made at pr...
By cliffhanger , 1 day ago
-
RE: How to choose Towel Rails for an ASHP
@rob-nezard yes absolutely. Here is the link and a pho...
By GrahamF , 3 days ago
-
@mixergy Thanks for the update, I would appreciate some...
By bontwoody , 3 days ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
Unfortunately I'm not that well connected 😂 ...
By Scalextrix , 3 days ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
It is interesting to see what our new Grant Aerona 290 ...
By GrahamF , 3 days ago
-
RE: Midea ASHP – how to set weather compensation
I noticed that too and thought the same thing, but then...
By cathodeRay , 4 days ago
-
RE: Ya can’t win! It is S*d’s Law!
@old_scientist If IOF is still running next late spring...
By Toodles , 4 days ago
-
RE: Electricity price predictions
Those of you on Agile will do well tomorrow; there are ...
By Toodles , 4 days ago
-
RE: Who’s Caved and Switched the Heating On Already?
We've been running our Ecodan system, installed in June...
By Sheriff Fatman , 4 days ago