Forums

Forums
Members
Gary
Activity
 
Notifications
Clear all
Gary
@gary
Member
Prominent Member
Joined: Feb 8, 2023
Last seen: Jul 31, 2025
Profile Activity
Topics: 2 / Replies: 348
AllTopicsReplies
Reply
RE: Ecodan 6kW - is it "cycling", or normal operation?

Can you post a picture of your LLH how much volume does it have? What is the flow speed in your primary circuit, go to service menu, running informa...

7 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: hum/whine from Wilo circulation pump

You are correct primary is the top right from the heat pump, secondary pumps round the rads you can’t break anything by turning them down. Turn prim...

7 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Mitsubishi Ecodan 8.5kW Monobloc (FTC5) Defrost Mode

If you have a mitsubishi preplumbed cylinder then its unlikely to be a low loss header, although that's what they call it, it has no volume its just a...

7 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Mitsubishi Ecodan 8.5kW Monobloc (FTC5) Defrost Mode

@jamespa, I can't check modulation but it will be running flat out but I think my is slightly undersized so don't really have any spare capacity to co...

7 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Mitsubishi Ecodan 8.5kW Monobloc (FTC5) Defrost Mode

Here is an example of what my 8.5kw Ecodan did last night when it was very damp and 1C outside. It defrosted every 50 mins, that takes 5 mins and ...

7 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: hum/whine from Wilo circulation pump

@grumpidoc so as it’s one zone you should only have that one pump for the heating. As I posted above you should be able to turn that all the way down...

7 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: hum/whine from Wilo circulation pump

Correction forgot to x 60 to get to L/min otherwise its in seconds

7 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: hum/whine from Wilo circulation pump

@grumpidoc Its from the mitsubishi databook see extract below Do you have an Ecodan preplumbed cylinder or a different model, a picture of your cy...

7 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Mitsubishi Ecodan 8.5kW Monobloc (FTC5) Defrost Mode

@alsocold123456 It doesn't sound like there is a problem to fix with your system that is pretty much what mine is doing in this damp cold weather. A...

7 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Vaillant Arotherm ASHP gets noisier when it gets colder outside

@tallmarc stated noise levels are made at a defined outside temperature not the worst case which is what we currently have in the depths of winter, mi...

7 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Mitsubishi Ecodan ASHP general set-up and efficiency

@ngillam Depending on your controller the pump speed for the HW can be controlled in 2 ways newer versions have pump speed in the service menu for bot...

7 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: ASHP for small garage and workshop

For such a small space wouldn’t A2A be better than A2W and you get cooling in summer.

7 months ago
Forum
Air Source Heat Pumps (ASHPs)
Page 10 / 30
Share:

Join Us!

Podcast Picks

Latest Posts

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →