Activity
 
Notifications
Clear all
cathodeRay
cathodeRay
@cathoderay
Moderator
Illustrious Member
Joined: Feb 28, 2022
Last seen: Sep 18, 2025
Topics: 17 / Replies: 2150
Reply
RE: Midea ASHP – how to set weather compensation

Agreed. The WC and thermostat settings only become relevant when the system is running, which can't that far away now, but we haven't got there yet. ...

2 weeks ago
Reply
RE: Midea ASHP – how to set weather compensation

I very much doubt that! I am talking about the primary pipework to and from the heat pump, inside the inadequate black insulation. In a 'normal' insta...

2 weeks ago
Reply
RE: Midea ASHP – how to set weather compensation

@pash44pump - thanks for the photos and 'scope' document. Both the installation and the 'scope' document appear somewhat chaotic, and, so far as I can...

2 weeks ago
Reply
RE: Midea ASHP – how to set weather compensation

@tim441 - an excellent succinct summary. @pash44pump - re-routing the pipework may well make sense, a one off cost vs a never-ending drip drip drip ...

2 weeks ago
Reply
RE: Midea ASHP – how to set weather compensation

@pash44pump - good, we're on the same page (screen) on the wired controller. As you can see from the chart I posted earlier, the LWT/RWT often vary a ...

2 weeks ago
Reply
RE: Midea ASHP – how to set weather compensation

If it were me, I would start with everything on/open, running on weather compensation, and take it from there (once the weather is cold enough to need...

2 weeks ago
Reply
RE: Midea ASHP – how to set weather compensation

This suggests that the heat pump was not running on weather compensation (WC) at the time you recorded these values. With WC you don't set the (flow) ...

2 weeks ago
Reply
RE: The good, the bad and the not that great – my heat pump installation

Sorry to resurrect this thread, but it is sort of relevant so on balance putting this here. But how do you actually adjust the pressure? I have exac...

3 weeks ago
Reply
RE: Getting the best out of a heat pump - is Homely a possible answer?

I missed your 22nd June post on this. I am sure it can be done in HA as well, but I use a standalone script that runs once an hour, checks the IAT and...

3 weeks ago
Reply
RE: Midea ASHP – how to set weather compensation

@pash44pump - the installers heat loss calculations appear to indicate a total heat loss of just under 9kW, which seems rather on the low side for the...

3 weeks ago
Reply
RE: Midea ASHP – how to set weather compensation

They look decidedly skimpy to me. A proper heat loss estimation (which is all they are - see many posts passim) uses a survey of all surface areas and...

3 weeks ago
Reply
RE: Seeking Help for In-Principle Quote to fix a botched heat pump installation by Heat Geek Installer

This is one of my biggest bugbears these days, how AI does make fools of us all (if we let it, which too many people do). Google's AI is just a text ...

3 weeks ago
Page 6 / 181
Share:

Join Us!

Latest Posts

Click to access the login or register cheese
x  Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO