Forums

Forums
Renewable Heating
Air Source Heat Pum...
MIDEA MHC-V16W/D2RN...
 
Notifications
Clear all

MIDEA MHC-V16W/D2RN8-Β Power Input Limitation

 
Air Source Heat Pumps (ASHPs)
Last Post by LamprosT 2 years ago
2 Posts
1 Users
0 Reactions
1,511 Views
RSS
 LamprosT
(@lamprost)
Active Member Member
Joined: 2 years ago
Posts: 3
Topic starter 03/12/2023 3:25 pm  

Hello, I would like to ask a question.

I have installed a MIDEA MHC-V16W/D2RN8-Β heat pump with MIDEA fan coils and when the weather is hot outside (>15oC) it cycles a lot at the heat mode...

There is an option "Power Input Limitation" on the service menu. Does this reduce the capacity of the heat pump in order to have less cycling?

I have made some tests but I cannot figure what exactly happens with that option.

Thank you very much!

(I'm sorry for my bad English) 

power input limitation


   
Quote
 LamprosT
(@lamprost)
Active Member Member
Joined: 2 years ago
Posts: 3
Topic starter 09/12/2023 7:42 am  

I performed some more tests...

With power input limitation set to 8, the lowest output that I get from the ASHP is around 3kW with 10oC external temperature at 38oC water temperature (with WC).

With this setup I have now 2 cycles / hour ... I think it is better now...

There is no option to measure the COP but I consume 12kWh/24h for heating (140 sq.m. - fancoil thermsotats set at 23-24oC) 

Have you managed to make it work lower?

Thank you very much!


This post was modified 2 years ago by LamprosT

   
ReplyQuote
Forum Jump:
  Previous Topic
Next Topic  

Currently viewing this topic 1 guest.



Share:

Join Us!

Login   Register

Podcast Picks

Latest Posts

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →