Recent Posts
 
Notifications
Clear all

Recent Posts

 |  Forums  |  Topics
Page 26 / 41
Posts with their shortened content
RE: Mitsubishi cycling while on chilled water output  

By IaAck, 3 weeks ago

  @downfield With a car radiator the hot water from the engine is piped to the top of the radiator and the cooled water is drawn off from the bottom. The height of the radiator typ. 45 cm so inlet is ap...
downfield RE: Mitsubishi cycling while on chilled water output  

By downfield, 3 weeks ago

  @iaack they have a finned emitter at the bottom a bit like a car radiator so the water runs horizontally through those. Most of the rad is empty but its purpose is to provide a chimney effect so they ...
RE: Mitsubishi cycling while on chilled water output  

By IaAck, 3 weeks ago

  @downfield I don't know how your fan coils are plumbed in but all the conventional radiators I've come across are connected to flow and return at the bottom of the radiator which i assume helps with h...
RE: Mitsubishi cycling while on chilled water output  

By JamesPa, 3 weeks ago

  Yes, but hopefully only for a few days of the year. If you wanted cooling more frequently I would be concerned about the effect of the cycling on compressor lifetime in which case you might want to c...
downfield RE: Mitsubishi cycling while on chilled water output  

By downfield, 3 weeks ago

  @judith not power consumption just the overall efficiency of operation and wear and tear which I imagine is bad for the HP? At the moment power is from solar panels - although I can export surplus so ...
RE: Struggling to Find a Top Heat Pump Installer? We Can Connect You With the Best Installers in the UK  

By abam48, 3 weeks ago

  @jamespa Thanks for the advice - very helpful. I had already seen your numerous posts RE buffer tanks so that is something that I will keep a close eye on as I progress with design and installation. W...
Sune RE: Weather compensated secondary circuits with Biomass  

By Sune, 3 weeks ago

  Hi @andycoo we do an LK 110 standalone weather compensating actuator with valve: LK are a top notch Swedish made. I haven't tried the German system, although it looks like it also does weather comp...
RE: Mitsubishi cycling while on chilled water output  

By Judith, 3 weeks ago

  Is the power consumption worrying you or are you just concerned about the cycling on principle?
RE: Mitsubishi cycling while on chilled water output  

By JamesPa, 3 weeks ago

  I think that explains it. Unless you can somehow increase load or system volume I think you are stuck with the cycling, unless of course others can suggest something. Bypassing the buffer will proba...
Page 26 / 41

 

 

 

Share:

Join Us!

Latest Posts

Members Online