<?xml version="1.0" encoding="UTF-8"?>        <rss version="2.0"
             xmlns:atom="http://www.w3.org/2005/Atom"
             xmlns:dc="http://purl.org/dc/elements/1.1/"
             xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
             xmlns:admin="http://webns.net/mvcb/"
             xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
             xmlns:content="http://purl.org/rss/1.0/modules/content/">
        <channel>
            <title>
									RDSAP10 effect on existing heat pump EPC rating? - Government Schemes, Regulations, Training, Planning &amp; Organisations				            </title>
            <link>https://renewableheatinghub.co.uk/forums/government-schemes/rdsap10-effect-on-existing-heat-pump-rating/</link>
            <description>Questions and discussions about renewable heating and heat pumps</description>
            <language>en-GB</language>
            <lastBuildDate>Sat, 05 Sep 2026 17:33:14 +0000</lastBuildDate>
            <generator>wpForo</generator>
            <ttl>60</ttl>
							                    <item>
                        <title>RE: RDSAP10 effect on existing heat pump EPC rating?</title>
                        <link>https://renewableheatinghub.co.uk/forums/government-schemes/rdsap10-effect-on-existing-heat-pump-rating/paged/5/#post-59449</link>
                        <pubDate>Mon, 23 Feb 2026 09:35:12 +0000</pubDate>
                        <description><![CDATA[@af1 My EPC rating jumped from E to C after installation of the heat pump. I can&#039;t say how much of that was due to the heat pump itself compared to other measures such as increasing loft ins...]]></description>
                        <content:encoded><![CDATA[<p>@af1 My EPC rating jumped from E to C after installation of the heat pump. I can't say how much of that was due to the heat pump itself compared to other measures such as increasing loft insulation and putting in LED bulbs everywhere (or the attitude of the surveyor) but it probably increased the capital value or at least saleability of the house significantly. </p>]]></content:encoded>
						                            <category domain="https://renewableheatinghub.co.uk/forums/government-schemes/">Government Schemes, Regulations, Training, Planning &amp; Organisations</category>                        <dc:creator>dr_dongle</dc:creator>
                        <guid isPermaLink="true">https://renewableheatinghub.co.uk/forums/government-schemes/rdsap10-effect-on-existing-heat-pump-rating/paged/5/#post-59449</guid>
                    </item>
				                    <item>
                        <title>RE: RDSAP10 effect on existing heat pump EPC rating?</title>
                        <link>https://renewableheatinghub.co.uk/forums/government-schemes/rdsap10-effect-on-existing-heat-pump-rating/paged/5/#post-55898</link>
                        <pubDate>Sun, 11 Jan 2026 12:41:40 +0000</pubDate>
                        <description><![CDATA[@transparent Perhaps the names at the end of the document include Lennox Brown and his assistant Richard Lamb.(Anon)]]></description>
                        <content:encoded><![CDATA[@transparent Perhaps the names at the end of the document include Lennox Brown and his assistant Richard Lamb.(Anon)]]></content:encoded>
						                            <category domain="https://renewableheatinghub.co.uk/forums/government-schemes/">Government Schemes, Regulations, Training, Planning &amp; Organisations</category>                        <dc:creator>Toodles</dc:creator>
                        <guid isPermaLink="true">https://renewableheatinghub.co.uk/forums/government-schemes/rdsap10-effect-on-existing-heat-pump-rating/paged/5/#post-55898</guid>
                    </item>
				                    <item>
                        <title>RE: RDSAP10 effect on existing heat pump EPC rating?</title>
                        <link>https://renewableheatinghub.co.uk/forums/government-schemes/rdsap10-effect-on-existing-heat-pump-rating/paged/5/#post-55894</link>
                        <pubDate>Sun, 11 Jan 2026 12:20:51 +0000</pubDate>
                        <description><![CDATA[…as in Jack?]]></description>
                        <content:encoded><![CDATA[<p></p>
<p>Who's writing these regulations?<br />Whitehall?</p>
<p></p>
<p>…as in Jack?</p>]]></content:encoded>
						                            <category domain="https://renewableheatinghub.co.uk/forums/government-schemes/">Government Schemes, Regulations, Training, Planning &amp; Organisations</category>                        <dc:creator>Majordennisbloodnok</dc:creator>
                        <guid isPermaLink="true">https://renewableheatinghub.co.uk/forums/government-schemes/rdsap10-effect-on-existing-heat-pump-rating/paged/5/#post-55894</guid>
                    </item>
				                    <item>
                        <title>RE: RDSAP10 effect on existing heat pump EPC rating?</title>
                        <link>https://renewableheatinghub.co.uk/forums/government-schemes/rdsap10-effect-on-existing-heat-pump-rating/paged/5/#post-55893</link>
                        <pubDate>Sun, 11 Jan 2026 12:16:19 +0000</pubDate>
                        <description><![CDATA[I foresee a new business opportunity.
I can start a new company to survey rental homes and replace old light-fittings with an LED unit at £5000 each. &#x1f914; 
&nbsp;

Brilliant...... s...]]></description>
                        <content:encoded><![CDATA[<p></p>
<p>Under the proposals, a landlord will not be able to rent out a property unless they meet the new standard - equivalent to an EPC C rating - or they have spent up to £15,000 on energy efficiency improvements to qualify for an exemption. </p>
<p></p>
<p>I foresee a new business opportunity.</p>
<p>I can start a new company to survey rental homes and replace old light-fittings with an LED unit at £5000 each. &#x1f914; </p>
<p>&nbsp;</p>
<p></p>
<p>The only difference to the property between the old and new EPCs was installation of a Smart meter.</p>
<p></p>
<p>Brilliant...<br />... so that's another strategy to artificially claim increased energy efficiency.</p>
<p>&nbsp;</p>
<p>Who's writing these regulations?<br />Whitehall?</p>]]></content:encoded>
						                            <category domain="https://renewableheatinghub.co.uk/forums/government-schemes/">Government Schemes, Regulations, Training, Planning &amp; Organisations</category>                        <dc:creator>Transparent</dc:creator>
                        <guid isPermaLink="true">https://renewableheatinghub.co.uk/forums/government-schemes/rdsap10-effect-on-existing-heat-pump-rating/paged/5/#post-55893</guid>
                    </item>
				                    <item>
                        <title>RE: RDSAP10 effect on existing heat pump EPC rating?</title>
                        <link>https://renewableheatinghub.co.uk/forums/government-schemes/rdsap10-effect-on-existing-heat-pump-rating/paged/5/#post-55826</link>
                        <pubDate>Sat, 10 Jan 2026 15:54:46 +0000</pubDate>
                        <description><![CDATA[@mike-patrick yes, even though the current system is rubbish i got my EPCs updated in part with expectation of England adopting the new UK Home Energy Model (HEM)... which will reduce validi...]]></description>
                        <content:encoded><![CDATA[<p>@mike-patrick yes, even though the current system is rubbish i got my EPCs updated in part with expectation of England adopting the new UK Home Energy Model (HEM)... which will reduce validity to 5 years... at more cost! </p>
<p>Hopefully the HEM will be a lot more meaningful. But they've still got huge problems with practical details.</p>
<p>- How is evidence proven and consistently applied?</p>
<p>- especially if a property has changed ownership?</p>
<p>I'm sure the HEM will not award me an A - even though net cost of my heating, EV, solar etc in 2025 was zero! 14500kWh imported at under 8p kWh and 7500kWh exported at 15p.</p>
<p>I accept there are limitations if EPC/HEM costs are to be kept at sub £100. Clashes of real world vs nice cosy committee theory.</p>
<p>&nbsp;</p>]]></content:encoded>
						                            <category domain="https://renewableheatinghub.co.uk/forums/government-schemes/">Government Schemes, Regulations, Training, Planning &amp; Organisations</category>                        <dc:creator>Tim441</dc:creator>
                        <guid isPermaLink="true">https://renewableheatinghub.co.uk/forums/government-schemes/rdsap10-effect-on-existing-heat-pump-rating/paged/5/#post-55826</guid>
                    </item>
				                    <item>
                        <title>RE: RDSAP10 effect on existing heat pump EPC rating?</title>
                        <link>https://renewableheatinghub.co.uk/forums/government-schemes/rdsap10-effect-on-existing-heat-pump-rating/paged/5/#post-55820</link>
                        <pubDate>Sat, 10 Jan 2026 15:14:36 +0000</pubDate>
                        <description><![CDATA[@tim441 I share your frustration with the EPC ratings. Attached is an extract from my new EPC which was done this week. You&#039;ll see that the Main Heating has the same description as yours but...]]></description>
                        <content:encoded><![CDATA[<p>@tim441 I share your frustration with the EPC ratings. Attached is an extract from my new EPC which was done this week. You'll see that the Main Heating has the same description as yours but that it is rated Good, rather than Average. The old EPC (done in 20127) rated exactly the same setup as Poor. Nothing about my property has changed so it must be the way the algorithm treats heat pumps.</p>
<p>EPC ratings lack transprency in the way the scores are reached and also appear to lack consistency between the same features in different properties. Merely by getting a new EPC I achieved an overall rating increase of 12 points. The only difference to the property between the old and new EPCs was installation of a Smart meter.</p>
<p>&nbsp;</p>
<p>Mike</p>
<p>&nbsp;</p>
13450]]></content:encoded>
						                            <category domain="https://renewableheatinghub.co.uk/forums/government-schemes/">Government Schemes, Regulations, Training, Planning &amp; Organisations</category>                        <dc:creator>Mike Patrick</dc:creator>
                        <guid isPermaLink="true">https://renewableheatinghub.co.uk/forums/government-schemes/rdsap10-effect-on-existing-heat-pump-rating/paged/5/#post-55820</guid>
                    </item>
				                    <item>
                        <title>RE: RDSAP10 effect on existing heat pump EPC rating?</title>
                        <link>https://renewableheatinghub.co.uk/forums/government-schemes/rdsap10-effect-on-existing-heat-pump-rating/paged/5/#post-55817</link>
                        <pubDate>Sat, 10 Jan 2026 13:43:41 +0000</pubDate>
                        <description><![CDATA[These proposals are for England and Wales only.  The new EPC arrangements as laid out in the Energy Performance of Buildings (Scotland) Regulations 2025 coming into force in Scotland on 31st...]]></description>
                        <content:encoded><![CDATA[<p>These proposals are for England and Wales only.  The new EPC arrangements as laid out in the Energy Performance of Buildings (Scotland) Regulations 2025 coming into force in Scotland on 31st October 2026.</p>
<h1 class="ds_page-header__title"><span> </span></h1>]]></content:encoded>
						                            <category domain="https://renewableheatinghub.co.uk/forums/government-schemes/">Government Schemes, Regulations, Training, Planning &amp; Organisations</category>                        <dc:creator>Abernyte</dc:creator>
                        <guid isPermaLink="true">https://renewableheatinghub.co.uk/forums/government-schemes/rdsap10-effect-on-existing-heat-pump-rating/paged/5/#post-55817</guid>
                    </item>
				                    <item>
                        <title>RE: RDSAP10 effect on existing heat pump EPC rating?</title>
                        <link>https://renewableheatinghub.co.uk/forums/government-schemes/rdsap10-effect-on-existing-heat-pump-rating/paged/5/#post-55801</link>
                        <pubDate>Sat, 10 Jan 2026 11:56:39 +0000</pubDate>
                        <description><![CDATA[Changes due to be announced later in 2026 with effect 2028
Replacing the EPC from 2028
The Government recently consulted on completely replacing the current EPC with a new set of metrics t...]]></description>
                        <content:encoded><![CDATA[<p>Changes due to be announced later in 2026 with effect 2028</p>
<h3>Replacing the EPC from 2028</h3>
<p>The Government recently consulted on completely replacing the current EPC with a new set of metrics that landlords will have to meet by 2028 for new tenancies and 2030 for existing tenancies (the Minimum Energy Efficiency Standard). </p>
<p>Under the proposals, a landlord will not be able to rent out a property unless they meet the new standard - equivalent to an EPC C rating - or they have spent up to £15,000 on energy efficiency improvements to qualify for an exemption. </p>
<p>The new standard will focus on three key metrics landlords will need to be aware of - fabric performance, smart readiness and heating systems.</p>
<ul>
<li><strong>Fabric performance</strong> - this covers how well heat is retained in the property including things like insulation and double glazing. </li>
<li><b>Smart readiness</b>  - this covers technology to help tenants manage their energy, including things like smart meters, storage batteries and solar panels. </li>
<li><b>Heating system - </b>this covers the heating system and is likely to mean that gas boilers score poorly while heat pumps score much better.</li>
</ul>
<p>All landlords will be expected to first meet the primary metric (fabric performance) or spend up to £15,000 to qualify for an exemption.<br /><br />After doing that, if the landlord has not already qualified for an exemption, they will be expected to improve the standard of either the smart readiness of the property or the heating system until they have spent up to £15,000 in total on improvements to qualify for an exemption.</p>
<h3>What happens to existing EPCs?</h3>
<p>The exact details of this new standard are set to be published in late 2026 but it is expected to mean lower scores for gas boilers and higher scores for heating systems like heat pumps, potentially meaning that properties rated C currently may fall below C when assessed under the new standard.</p>
<p>Once the new standard is released, then whether you will need to get a new EPC will depend on the following:</p>
<ul>
<li><strong>If you already have an existing EPC rated C</strong> or higher no new EPC will be needed until that EPC expires. You may continue to rent out the property without any further improvements until that EPC expires. Once that EPC does expire you will need to meet the new MEES standard or apply for an exemption. </li>
<li><strong>If you have an existing EPC rated D-G</strong> you will need to get a replacement EPC after the new standard is published in late 2026 and work to meet the new standard by 2028 for new tenancies</li>
</ul>
<p>In addition to this, a number of other changes are being proposed that will mean more tenancies will need EPCs more frequently.</p>
<ul>
<li><strong>Houses in multiple occupation that are let by the room</strong> will be expected to also have EPCs once the new standard is published</li>
<li><strong>Listed buildings</strong> will be expected to have an EPC but are likely to remain exempt from performing significant works to the property</li>
<li><b>Continuous records of EPCs </b>will need to be maintained. Currently if an EPC lapses while you have a sitting tenant you don't need to get a new EPC until you change tenant. The Government is proposing changing this so that you must always have a current energy performance certificate. </li>
</ul>
<p>Given that EPCs last 10 years, landlords who already have an EPC C before the new standard comes in would not have to worry about these changes for up to a decade. If you are in that situation, or you could meet an EPC C with relatively minimal cost, you should consider renewing your EPC before the new standard comes in to maximise this benefit. You should only do this if you are confident the property will still get a C rating though.</p>
<p><strong>Please note that this information is subject to change based on the Government's consultation responses. These are expected later this year. </strong></p>
<p>https://www.nrla.org.uk/resources/energy-efficiency/energy-performance-certificates-epc</p>]]></content:encoded>
						                            <category domain="https://renewableheatinghub.co.uk/forums/government-schemes/">Government Schemes, Regulations, Training, Planning &amp; Organisations</category>                        <dc:creator>Tim441</dc:creator>
                        <guid isPermaLink="true">https://renewableheatinghub.co.uk/forums/government-schemes/rdsap10-effect-on-existing-heat-pump-rating/paged/5/#post-55801</guid>
                    </item>
				                    <item>
                        <title>RE: RDSAP10 effect on existing heat pump EPC rating?</title>
                        <link>https://renewableheatinghub.co.uk/forums/government-schemes/rdsap10-effect-on-existing-heat-pump-rating/paged/5/#post-55798</link>
                        <pubDate>Sat, 10 Jan 2026 11:49:28 +0000</pubDate>
                        <description><![CDATA[Reminder:
Changes to EPC methodology in 2025

On 15 June 2025 the methodology for calculating EPC ratings was updated. This update (known as RDSAP10) includes things like: 

More detail...]]></description>
                        <content:encoded><![CDATA[<p>Reminder:</p>
<h2 class="text-left " style="--heading-size: 24px;position: unset;color: #f37321;font-family: Roboto, Helvetica, Arial, ui-sans-serif, sans-serif;font-size: 24px;writing-mode: unset;aspect-ratio: unset;background-attachment: unset;background-blend-mode: unset;background-color: #173b54;background-image: unset;background-position: unset;background-repeat: unset;background-size: unset;border: unset;border-radius: unset;border-collapse: unset;box-shadow: unset;caption-side: unset;clear: unset;columns: unset;column-fill: unset;gap: unset;column-rule: unset;column-span: unset;cursor: unset;filter: unset;flex: unset;flex-flow: unset;float: unset;height: unset;line-height: 32px;max-height: unset;max-width: unset;min-height: unset;min-width: unset;object-fit: unset;object-position: unset;opacity: unset;overflow: unset;vertical-align: unset;border-spacing: unset;width: unset;z-index: unset;padding: 0.5rem unset unset unset;margin: 16px unset 1rem unset">Changes to EPC methodology in 2025</h2>
<div class="text-left" style="position: unset;color: #f6f7f8;font-family: Roboto, Helvetica, Arial, ui-sans-serif, sans-serif;font-size: 16px;writing-mode: unset;aspect-ratio: unset;background-attachment: unset;background-blend-mode: unset;background-color: #173b54;background-image: unset;background-position: unset;background-repeat: unset;background-size: unset;border: unset;border-radius: unset;border-collapse: unset;box-shadow: unset;caption-side: unset;clear: unset;columns: unset;column-fill: unset;gap: unset;column-rule: unset;column-span: unset;cursor: unset;filter: unset;flex: unset;flex-flow: unset;float: unset;height: unset;line-height: unset;max-height: unset;max-width: unset;min-height: unset;min-width: unset;object-fit: unset;object-position: unset;opacity: unset;overflow: unset;padding: unset;vertical-align: unset;border-spacing: unset;width: unset;z-index: unset;margin: 1rem unset unset unset">
<p style="position: unset;color: unset;font: unset;writing-mode: unset;aspect-ratio: unset;background: unset;background-blend-mode: unset;border: unset;border-radius: unset;border-collapse: unset;box-shadow: unset;caption-side: unset;clear: unset;columns: unset;column-fill: unset;gap: unset;column-rule: unset;column-span: unset;cursor: unset;filter: unset;flex: unset;flex-flow: unset;float: unset;height: unset;letter-spacing: unset;max-height: unset;max-width: unset;min-height: unset;min-width: unset;object-fit: unset;object-position: unset;opacity: unset;overflow: unset;padding: unset;text-align: unset;text-decoration: unset;text-indent: unset;text-transform: unset;vertical-align: unset;border-spacing: unset;width: unset;z-index: unset;margin: 1rem unset 1rem unset">On 15 June 2025 the methodology for calculating EPC ratings was updated. This update (known as RDSAP10) includes things like: </p>
<ul style="position: unset;color: unset;font: unset;writing-mode: unset;aspect-ratio: unset;background: unset;background-blend-mode: unset;border: unset;border-radius: unset;border-collapse: unset;box-shadow: unset;caption-side: unset;clear: unset;columns: unset;column-fill: unset;gap: unset;column-rule: unset;column-span: unset;cursor: unset;filter: unset;flex: unset;flex-flow: unset;float: unset;height: unset;letter-spacing: unset;list-style-type: revert;margin: revert;max-height: unset;max-width: unset;min-height: unset;min-width: unset;object-fit: unset;object-position: unset;opacity: unset;overflow: unset;padding: revert;text-align: unset;text-decoration: unset;text-indent: unset;text-transform: unset;vertical-align: unset;border-spacing: unset;width: unset;z-index: unset">
<li style="position: unset;color: unset;font: unset;writing-mode: unset;aspect-ratio: unset;background: unset;background-blend-mode: unset;border: unset;border-radius: unset;border-collapse: unset;box-shadow: unset;caption-side: unset;clear: unset;columns: unset;column-fill: unset;gap: unset;column-rule: unset;column-span: unset;cursor: unset;filter: unset;flex: unset;flex-flow: unset;float: unset;height: unset;letter-spacing: unset;margin: unset;max-height: unset;max-width: unset;min-height: unset;min-width: unset;object-fit: unset;object-position: unset;opacity: unset;overflow: unset;padding: unset;text-align: unset;text-decoration: unset;text-indent: unset;text-transform: unset;vertical-align: unset;border-spacing: unset;width: unset;z-index: unset">More detailed and accurate information on the types of walls and wall insulation options. </li>
<li style="position: unset;color: unset;font: unset;writing-mode: unset;aspect-ratio: unset;background: unset;background-blend-mode: unset;border: unset;border-radius: unset;border-collapse: unset;box-shadow: unset;caption-side: unset;clear: unset;columns: unset;column-fill: unset;gap: unset;column-rule: unset;column-span: unset;cursor: unset;filter: unset;flex: unset;flex-flow: unset;float: unset;height: unset;letter-spacing: unset;margin: unset;max-height: unset;max-width: unset;min-height: unset;min-width: unset;object-fit: unset;object-position: unset;opacity: unset;overflow: unset;padding: unset;text-align: unset;text-decoration: unset;text-indent: unset;text-transform: unset;vertical-align: unset;border-spacing: unset;width: unset;z-index: unset">A requirement to individually measure all windows in a home.</li>
<li style="position: unset;color: unset;font: unset;writing-mode: unset;aspect-ratio: unset;background: unset;background-blend-mode: unset;border: unset;border-radius: unset;border-collapse: unset;box-shadow: unset;caption-side: unset;clear: unset;columns: unset;column-fill: unset;gap: unset;column-rule: unset;column-span: unset;cursor: unset;filter: unset;flex: unset;flex-flow: unset;float: unset;height: unset;letter-spacing: unset;margin: unset;max-height: unset;max-width: unset;min-height: unset;min-width: unset;object-fit: unset;object-position: unset;opacity: unset;overflow: unset;padding: unset;text-align: unset;text-decoration: unset;text-indent: unset;text-transform: unset;vertical-align: unset;border-spacing: unset;width: unset;z-index: unset">More specific information on the thickness of roof insulation</li>
<li style="position: unset;color: unset;font: unset;writing-mode: unset;aspect-ratio: unset;background: unset;background-blend-mode: unset;border: unset;border-radius: unset;border-collapse: unset;box-shadow: unset;caption-side: unset;clear: unset;columns: unset;column-fill: unset;gap: unset;column-rule: unset;column-span: unset;cursor: unset;filter: unset;flex: unset;flex-flow: unset;float: unset;height: unset;letter-spacing: unset;margin: unset;max-height: unset;max-width: unset;min-height: unset;min-width: unset;object-fit: unset;object-position: unset;opacity: unset;overflow: unset;padding: unset;text-align: unset;text-decoration: unset;text-indent: unset;text-transform: unset;vertical-align: unset;border-spacing: unset;width: unset;z-index: unset">The type and number of light bulbs</li>
<li style="position: unset;color: unset;font: unset;writing-mode: unset;aspect-ratio: unset;background: unset;background-blend-mode: unset;border: unset;border-radius: unset;border-collapse: unset;box-shadow: unset;caption-side: unset;clear: unset;columns: unset;column-fill: unset;gap: unset;column-rule: unset;column-span: unset;cursor: unset;filter: unset;flex: unset;flex-flow: unset;float: unset;height: unset;letter-spacing: unset;margin: unset;max-height: unset;max-width: unset;min-height: unset;min-width: unset;object-fit: unset;object-position: unset;opacity: unset;overflow: unset;padding: unset;text-align: unset;text-decoration: unset;text-indent: unset;text-transform: unset;vertical-align: unset;border-spacing: unset;width: unset;z-index: unset">The presence of new technologies such as small scale hydroelectric generation</li>
<li style="position: unset;color: unset;font: unset;writing-mode: unset;aspect-ratio: unset;background: unset;background-blend-mode: unset;border: unset;border-radius: unset;border-collapse: unset;box-shadow: unset;caption-side: unset;clear: unset;columns: unset;column-fill: unset;gap: unset;column-rule: unset;column-span: unset;cursor: unset;filter: unset;flex: unset;flex-flow: unset;float: unset;height: unset;letter-spacing: unset;margin: unset;max-height: unset;max-width: unset;min-height: unset;min-width: unset;object-fit: unset;object-position: unset;opacity: unset;overflow: unset;padding: unset;text-align: unset;text-decoration: unset;text-indent: unset;text-transform: unset;vertical-align: unset;border-spacing: unset;width: unset;z-index: unset">Heat pumps will be recommended more regularly for homes that are suitable and where it is cost effective. </li>
<li style="position: unset;color: unset;font: unset;writing-mode: unset;aspect-ratio: unset;background: unset;background-blend-mode: unset;border: unset;border-radius: unset;border-collapse: unset;box-shadow: unset;caption-side: unset;clear: unset;columns: unset;column-fill: unset;gap: unset;column-rule: unset;column-span: unset;cursor: unset;filter: unset;flex: unset;flex-flow: unset;float: unset;height: unset;letter-spacing: unset;margin: unset;max-height: unset;max-width: unset;min-height: unset;min-width: unset;object-fit: unset;object-position: unset;opacity: unset;overflow: unset;padding: unset;text-align: unset;text-decoration: unset;text-indent: unset;text-transform: unset;vertical-align: unset;border-spacing: unset;width: unset;z-index: unset">New recommendations including PV battery storage and diverters will be suggested but only where PV systems exist already.</li>
</ul>
<p style="position: unset;color: unset;font: unset;writing-mode: unset;aspect-ratio: unset;background: unset;background-blend-mode: unset;border: unset;border-radius: unset;border-collapse: unset;box-shadow: unset;caption-side: unset;clear: unset;columns: unset;column-fill: unset;gap: unset;column-rule: unset;column-span: unset;cursor: unset;filter: unset;flex: unset;flex-flow: unset;float: unset;height: unset;letter-spacing: unset;max-height: unset;max-width: unset;min-height: unset;min-width: unset;object-fit: unset;object-position: unset;opacity: unset;overflow: unset;padding: unset;text-align: unset;text-decoration: unset;text-indent: unset;text-transform: unset;vertical-align: unset;border-spacing: unset;width: unset;z-index: unset;margin: 1rem unset 1rem unset">These changes mean that EPCs require more detailed inspections and measurements, so it is likely to take more time to perform and cost more for an inspection.</p>
</div>
<p>&nbsp;</p>]]></content:encoded>
						                            <category domain="https://renewableheatinghub.co.uk/forums/government-schemes/">Government Schemes, Regulations, Training, Planning &amp; Organisations</category>                        <dc:creator>Tim441</dc:creator>
                        <guid isPermaLink="true">https://renewableheatinghub.co.uk/forums/government-schemes/rdsap10-effect-on-existing-heat-pump-rating/paged/5/#post-55798</guid>
                    </item>
				                    <item>
                        <title>RE: RDSAP10 effect on existing heat pump EPC rating?</title>
                        <link>https://renewableheatinghub.co.uk/forums/government-schemes/rdsap10-effect-on-existing-heat-pump-rating/paged/5/#post-55765</link>
                        <pubDate>Fri, 09 Jan 2026 20:37:04 +0000</pubDate>
                        <description><![CDATA[@mike-patrick interesting update - thanks.I&#039;ve been through an extended process on my EPC update.Mine was done in 2020 pre ashp &amp; solar/batteriesUpdated recently to take into account cha...]]></description>
                        <content:encoded><![CDATA[<p>@mike-patrick interesting update - thanks.<br /><br />I've been through an extended process on my EPC update.<br /><br />Mine was done in 2020 pre ashp &amp; solar/batteries<br /><br />Updated recently to take into account changes. But i had not realised the criteria changes meant i had minuses as well as pluses<br /><br />Latest criteria also mean glazing is more accurately measured for size and other detail. I have a lot of glazing - some single &amp; some double</p>
<p>I was hugely disappointed that the heat pump was rated average &amp; Hot water rated average. Both benefit from COP. </p>
<p>Anyway</p>
<p>Previous epc was D 67</p>
<p>Now D 62</p>
<p>In 2011 it was E 44</p>
<p>In 2015 after the modern extension it was D 55</p>
<p>At the end of day I've given up fighting further! It's all a nonsense. </p>
<p>With the improvements I've made i think the logical EPC would be mid C</p>
<p>Half house is modern build &amp; insulation</p>
<p>Half is old, listed </p>
<p>Ashp, solar, batteries</p>
13430]]></content:encoded>
						                            <category domain="https://renewableheatinghub.co.uk/forums/government-schemes/">Government Schemes, Regulations, Training, Planning &amp; Organisations</category>                        <dc:creator>Tim441</dc:creator>
                        <guid isPermaLink="true">https://renewableheatinghub.co.uk/forums/government-schemes/rdsap10-effect-on-existing-heat-pump-rating/paged/5/#post-55765</guid>
                    </item>
							        </channel>
        </rss>
		
<!--
Performance optimized by W3 Total Cache. Learn more: https://www.boldgrid.com/w3-total-cache/?utm_source=w3tc&utm_medium=footer_comment&utm_campaign=free_plugin

Object Caching 60/68 objects using Redis
Page Caching using Disk: Enhanced (Requested URI contains query) 
Lazy Loading

Served from: renewableheatinghub.co.uk @ 2026-09-05 18:33:14 by W3 Total Cache
-->