Forums

Forums
Members
RiponOwl
Activity
 
Notifications
Clear all
RiponOwl
@riponowl
Member
Estimable Member
219 kWhs
Joined: Jan 5, 2022
Last seen: Oct 25, 2023
Profile Activity
Topics: 2 / Replies: 41
AllTopicsReplies
Reply
RE: Low flow rate on Samsung Gen6 12KW heat pump

@iancalderbank Thank you.

6 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Low flow rate on Samsung Gen6 12KW heat pump

@mike-h Thanks Mike, that is super helpful.

6 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Low flow rate on Samsung Gen6 12KW heat pump

Just looking at this again. Do you have a data cable going from your zone valve to your Eastron? Mine zone valves don't have any data cables, the only...

6 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Low flow rate on Samsung Gen6 12KW heat pump

@iancalderbank Where do you go to set a reheat timer for the HW? I'll try adding some lagging to the pipework and see if that helps. I had assumed t...

6 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Low flow rate on Samsung Gen6 12KW heat pump

@mike-h Thanks. That had me confused for a long time. I'll add it to the long list of G L problems.

6 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Low flow rate on Samsung Gen6 12KW heat pump

The heat pump does most of its work between 3:30pm and 9pm that's the period when the Hive thermostat increases the required temp. Here is the data fr...

6 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Low flow rate on Samsung Gen6 12KW heat pump

Yes, it does seem to jump up to 58ish. In September my heating was off and graph is the same, so it seems like it's the hot water spiking up every 5 h...

6 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Low flow rate on Samsung Gen6 12KW heat pump

Yes, it came with the system, I'll post some screenshots below. One of the many problems with this install was the installer put in powerline plugs to...

6 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Low flow rate on Samsung Gen6 12KW heat pump

@iancalderbank Thank you so much for the detailed response. Do you have a suggestion for what to use instead of the Honeywell zone valves?

6 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Low flow rate on Samsung Gen6 12KW heat pump

The system is heating my house satisfactorily with efficiency of around 3.5 (if I can believe Passivliving). Of course I am always looking for ways to...

6 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Low flow rate on Samsung Gen6 12KW heat pump

Yes. What a nightmare. Thanks, I just used the online editor atwhich is free to use. The only drawback is having to download the file each time y...

6 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Low flow rate on Samsung Gen6 12KW heat pump

I've just looked through some of my documents. The MCS certificate says 50c so they that's another thing they lied about. Also here is part of the...

6 months ago
Forum
Air Source Heat Pumps (ASHPs)
Page 1 / 4
Share:

Join Us!

Latest Posts

x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
Shield Security →