Last seen: Jul 4, 2022
@hughf I must confess I have no idea what a "homely stat" is. Also, I am a bit limited to the ASHPs that my installer works with, and they strongly pr...
@majordennisbloodnok many thanks, good to know you've had a good experience with the Mitsubishi pump. I assume you don't have the Mixergy cylinder?
I had not heard about thermosiphoning. So placing the storage cylinder on the ground floor is less efficient than in a higher floor? And the Mixergy t...
Thanks Robl. Both the utility and the loft are inside the house's thermal envelope. Interesting what you say about the pipes leaking heat. That probab...
@majordennisbloodnok this is extremely helpful, thank you. Dore Woodman is one of the installers we got estimates from and as we are trying to decide ...
@cycleneil exactly. We are doing what we can to improve the insulation of our 1929 terrace, but I don't expect the thermal performance end result will...
@majordennisbloodnok I tried to send you a message but it seems I am not allowed to yet - perhaps because I only joined today. I see you went with the...
@cycleneil yes, the Grant Aerona 3 and Mitsubishi Ecodan models are claimed as compliant with this (arbitrary ...!) limit, though one has to wonder qu...
@majordennisbloodnok I looked in the Bromley planning permissions website. There are a handful of cases that mention air source heat pumps, but they w...
There are definitely differences between the countries. The property in question is in London so English rules would apply. I fear making an applicati...
- 24 Forums
- 1,402 Topics
- 29.4 K Posts
- 22 Online
- 1,185 Members
Join Us!
Latest Posts
-
RE: Recommended ASHP installers in Hampshire
@editor we are just south of Petersfield. Octopus- la...
By benson , 6 hours ago
-
By Mars , 7 hours ago
-
RE: Aira Heat Pump: Stylish Scandinavian Heating
I've learned some more from my discussions with Aira. ...
By IvanOpinion , 9 hours ago
-
RE: Is this a bad installation and is there something wrong with my Samsung heat pump?
The most you're likely to get from a regulator like MCS...
By Transparent , 10 hours ago
-
RE: New Installation - Grant Aerona 3 + 210L Hot Water Cylinder
@macfxd LLH = Low Loss Header - it's on the right of ...
By MikeFl , 11 hours ago
-
RE: ASHP Cut-off Temperatures: What's Your Setting and is a Your Heating Still On?
@technogeek Yes it does. It's in the field settings
By LeChillou , 11 hours ago
-
RE: New Fogstar 15.5kWh upright solution
Yes, its on 21C 24/7 from end Sept until start of May. ...
By Vince31 , 13 hours ago
-
Vaillant Arotherm Settings for New Installation
Im just helping my brother in law with his new 7kW Arot...
By bontwoody , 15 hours ago
-
RE: EV charger installation question – I don't want to bury the cable
Hello @hem. And I see that @editor has very quickly fou...
By Transparent , 16 hours ago
-
RE: Say hello and introduce yourself
@editor I'm in Shropshire I had read that microbor...
By IRMartini , 18 hours ago
-
RE: Are Solar Diverters Necessary for Homes with ASHPs and Solar PV?
Yeah, my diverter is off almost all the time since we h...
By Andris , 1 day ago
-
RE: Creating a second zone on Mitsubishi Ecodan ASHP
Thanks for your time with this Gary. I have a wireless...
By BryanB , 2 days ago
-
RE: Error on Immersun – Error 8 Load Short Circuit
@julesmp8 After a whole battery of tests? 😉
By Toodles , 2 days ago
-
RE: Delivering a smart and secure electricity system: government consultation
@abernyte Well, anything is possible, after all, we hav...
By Toodles , 2 days ago
-
RE: Heat Pump Paradox: The Industry's Adoption Divide
@majordennisbloodnok 😆
By Toodles , 3 days ago
-
RE: How to increase DHW water temperature on Samsung Gen 6 Control Panel
@jamespa I have the Samsung high temp quiet model and w...
By TechnoGeek , 3 days ago
-
RE: Need a bit of help please: problematic heat pump installation
Thanks for the replies, and looking back it is a bit va...
By Seagrave , 3 days ago
-
RE: GSHP running UFH but no feedback loop yet.
thanks! It did turn out to be a sort of fault - well, ...
By petew , 3 days ago
-
RE: My ASHP is not performing as well as I’d hoped: COP just over 2
@hcas - exactly so. I did read one other persons simila...
By HarriUp , 5 days ago
-
RE: The EPC Dilemma: How Current Ratings Fail Heat Pumps
@toodles your EPC is a limited tool that needs to be af...
By ajn9000 , 5 days ago
Latest Topics
-
By Mars 7 hours ago
-
Recommended ASHP installers in Hampshire
By benson 7 hours ago
-
Vaillant Arotherm Settings for New Installation
By bontwoody 15 hours ago
-
EV charger installation question – I don't want to bury the cable
By Hem 16 hours ago
-
Creating a second zone on Mitsubishi Ecodan ASHP
By BryanB 5 days ago