Last seen: Apr 16, 2024
Caution everyone, this manual stipulates the installation of a buffer tank, so, the promised guaranty of supplying sufficient heat, may come at a very...
@ecobaker probably not
Yes, just make sure you have the correct flow rate at all times.
@bontwoody Maybe they have corrected it, I hope so.
@toodles Spot on, mostly from installers therefore end users, someone has to pay for it. However, that is only a very small part of the cost. I ran ...
@bontwoody That flow temperature is pretty close to 45 Deg C (43 deg C), it could be sensor drift that is causing the activation, it is clear that it ...
MCS and Heat Geek are not the same thing. MCS is a standard that any Heat Geek, or any other installer, has to abide by. It is not an installation sta...
@ecobaker They work reasonably well on open zone, just make sure you always have the minimum flow rate. Attached is a manual with the open zone prog...
@toodles The Heat Geek brand is just that, a commercial, moneymaking brand.
@editor It is a physical and practical impossibility to balance a buffer in all instances and with varying loads, flow rates, temperatures and compres...
@nicholab I am not sure I understand what you have said, are you saying that the contract they gave you said it would be expensive to run? That back...
@nicholab According to your oil usage, you are using about 12000 Kw house per year, according to the EPC (which will be woefully inaccurate) you will ...
- 24 Forums
- 1,404 Topics
- 29.4 K Posts
- 33 Online
- 1,185 Members
Join Us!
Latest Posts
-
RE: Say hello and introduce yourself
One of the advantages of microbore is that it can be ea...
By Transparent , 15 mins ago
-
RE: MCS Heat Loss Calculations
Exactly. Hall, stairs and landing are just another roo...
By JamesPa , 29 mins ago
-
RE: Recommended ASHP installers in Hampshire
@benson If you do speak to Ian, just mention Mike in Re...
By Toodles , 38 mins ago
-
For those users with a Mitsubishi ASHP or AC which they...
By Abernyte , 4 hours ago
-
By Mars , 17 hours ago
-
RE: Aira Heat Pump: Stylish Scandinavian Heating
I've learned some more from my discussions with Aira. ...
By IvanOpinion , 19 hours ago
-
RE: Is this a bad installation and is there something wrong with my Samsung heat pump?
The most you're likely to get from a regulator like MCS...
By Transparent , 20 hours ago
-
RE: New Installation - Grant Aerona 3 + 210L Hot Water Cylinder
@macfxd LLH = Low Loss Header - it's on the right of ...
By MikeFl , 21 hours ago
-
RE: ASHP Cut-off Temperatures: What's Your Setting and is a Your Heating Still On?
@technogeek Yes it does. It's in the field settings
By LeChillou , 22 hours ago
-
RE: New Fogstar 15.5kWh upright solution
Yes, its on 21C 24/7 from end Sept until start of May. ...
By Vince31 , 24 hours ago
-
Vaillant Arotherm Settings for New Installation
Im just helping my brother in law with his new 7kW Arot...
By bontwoody , 1 day ago
-
RE: EV charger installation question – I don't want to bury the cable
Hello @hem. And I see that @editor has very quickly fou...
By Transparent , 1 day ago
-
RE: Are Solar Diverters Necessary for Homes with ASHPs and Solar PV?
Yeah, my diverter is off almost all the time since we h...
By Andris , 2 days ago
-
RE: Creating a second zone on Mitsubishi Ecodan ASHP
Thanks for your time with this Gary. I have a wireless...
By BryanB , 2 days ago
-
RE: Error on Immersun – Error 8 Load Short Circuit
@julesmp8 After a whole battery of tests? 😉
By Toodles , 3 days ago
-
RE: Delivering a smart and secure electricity system: government consultation
@abernyte Well, anything is possible, after all, we hav...
By Toodles , 3 days ago
-
RE: Heat Pump Paradox: The Industry's Adoption Divide
@majordennisbloodnok 😆
By Toodles , 3 days ago
-
RE: How to increase DHW water temperature on Samsung Gen 6 Control Panel
@jamespa I have the Samsung high temp quiet model and w...
By TechnoGeek , 3 days ago
-
RE: Need a bit of help please: problematic heat pump installation
Thanks for the replies, and looking back it is a bit va...
By Seagrave , 3 days ago
-
RE: GSHP running UFH but no feedback loop yet.
thanks! It did turn out to be a sort of fault - well, ...
By petew , 3 days ago
Latest Topics
-
By jswhite 2 hours ago
-
By Abernyte 4 hours ago
-
By Mars 17 hours ago
-
Recommended ASHP installers in Hampshire
By benson 18 hours ago
-
Vaillant Arotherm Settings for New Installation
By bontwoody 1 day ago