Last seen: Mar 29, 2024
The actual temperature sensor is near the end of the black outer sheath, and the cable tie is probably to stop the outer sheath from moving. See the a...
Achieving efficient defrosting is a problem with which a sufficiently large volumiser would probably assist, rather than using an immersion heater. Wh...
The sensor to which I refer is located inside the unit and should be attached to the pipework coming out of the evaporator.
@david999 While it is not for your Samsung heat pump, the following video will give you some idea of what may be the cause of your problem.
@david999 One thing that may need to be checked is that any of the temperature sensors inside the heat pump have not become loose and are therefore ...
In the real World, the test equipment should be at least 3 times more accurate than the device being tested. So if the device being tested is specifie...
How do you know that the thermal camera or any other reference device is actually providing accurate readings? What is the manufacturer's specified ...
The way that a heat pump defrosts is by reversing the direction that the refrigerant gas flows around the heat pump unit, so instead of absorbing ther...
I suppose that the ideal solution would be to have reputable companies that merely perform heat loss calculations for a reasonable cost that is then s...
@jamespa You are indeed correct, it may depend upon what the water pump(s) are doing. I know that some of the heat pump controllers continue to ru...
If my understanding is correct, volumisers and buffer tanks may be primarily required to help with the defrost cycle. Once this additional volume of w...
- 24 Forums
- 1,361 Topics
- 28.7 K Posts
- 21 Online
- 1,157 Members
Join Us!
Latest Posts
-
Removing a Low Loss Header from Samsung Gen6 System
My system has a low loss header, which for effiency I’d...
By EcoBaker , 6 hours ago
-
RE: Jokes and fun posts about heat pumps and renewables
Givenergy posted a pic of Ed Milligan’s visiting their ...
By Mars , 7 hours ago
-
RE: Aira Heat Pump: Stylish Scandinavian Heating
The true test will come with time and results, but base...
By Mars , 8 hours ago
-
RE: Assessing Heatmiser Neostat Accuracy: How and Why to Calibrate Them
Ours will also probably go when we commence with the wo...
By Mars , 8 hours ago
-
-
RE: Our Vaillant VWL year end review - North East Scotland
@gary thanks Gary, I am certainly coming around to that...
By Neil@highland , 10 hours ago
-
RE: Is this a bad installation and is there something wrong with my Samsung heat pump?
The actual temperature sensor is near the end of the bl...
By Derek M , 12 hours ago
-
RE: Battle of the charging technologies
I think we need to consider the charging schedule again...
By Transparent , 14 hours ago
-
RE: PAS_63100_2024 - BSI guidance on BESS (battery energy storage systems) in dwellings
@guthrie - don't worry. PAS_63100_2024 is not a retrosp...
By AllyFish , 17 hours ago
-
RE: Daikin Altherma noisy heat pump - help and advice needed
Hello, So we had another visit yesterday, two install...
By Clairelp , 18 hours ago
-
RE: Electricity price predictions
Or is refusal to burn wood when the market price is abo...
By Judith , 19 hours ago
-
RE: Forum updates, announcements & issues
Image and attachment uploads have been fixed.
By Mars , 20 hours ago
-
Design & Measurements of Heat Pump Performance? W...
By iantelescope , 20 hours ago
-
@harriup thanks for your post it’s good to get a differ...
By SUNandAIR , 1 day ago
-
RE: Smart meter installation – seamless or a potential nightmare?
@transparent I am particularly interested in how the...
By IanMK13 , 2 days ago
-
RE: Say hello and introduce yourself
Given all the discussion on here I wonder if there is n...
By Systemsthinker01 , 2 days ago
-
-
RE: Installing a heat pump in a Grade II listed property
This is true not just of Heat Pumps, of course. Whenev...
By IanMK13 , 3 days ago
-
RE: Rate the quality of your heat pump design and installation
@editor Hi Mars, he is a sole trader who has installed ...
By TechnoGeek , 3 days ago
-
RE: New Fogstar 15.5kWh upright solution
@adrianmc thanks but I was also offering a solution, ie...
By MisterB , 3 days ago
Latest Topics
-
Removing a Low Loss Header from Samsung Gen6 System
By EcoBaker 6 hours ago
-
Benefits of improved insulation.
By Derek M 3 days ago
-
By vala 4 days ago
-
Cheaper and Faster grid upgrades?
By Toodles 4 days ago
-
Ground Source Heat Pump Systems and Their Design
By Brendon Uys 4 days ago
-
By DavidAlgarve 5 days ago