Last seen: Apr 3, 2024
Seeing as it’s the controls that deliver the comfort, not the heat pump, or boiler, it’s all a bit “British” to blame the heat pump or boiler. we ha...
Both flow rates and temperatures affect output, and I doubt BSRIA has the technology to match them to design specifications. Manufactures have f...
@gshpwoes what floor coverings? What floor structure? Concrete or in wood? heatmiser thermostats.?
to think that in the 1980s, many centralised systems were ripped out and replaced with individual combi boilers!
@editor what’s needed is a new trade, a sort of eco technician, or specifying and commissioning specialist That all grates with many’s understan...
Educating installers is all very well, but they need skills to educate the public. Heat Geek started with similar ambitions yet they allow the use of...
noisey pump is an issue!
A heat pump needs to be installed a certain way, as do condensing boilers to optimise them. Prosaic understanding of heating (turning on and off, en...
sounds like it is working in weather compensation already.. it indeed fascinating how much heat there us in luke warm water in rads I rath...
Please do not demonise installers. That code would throw many an installer, and support from manufacturers for installers is woeful, as is the trainin...
This thread is a real testament to how behind the heating industry is in this country. There is little that can be done to improve existing systems al...
Yes that’s true, it’s about plant efficiency ( a route to economy) which is enhanced at low flow temps universally low temps means poor recovery...
- 24 Forums
- 1,406 Topics
- 29.6 K Posts
- 39 Online
- 1,192 Members
Join Us!
Latest Posts
-
RE: Delivering a smart and secure electricity system: government consultation
Good luck with that @Transparent. However, in the light...
By eggnchips , 24 mins ago
-
-
RE: Are Solar Diverters Necessary for Homes with ASHPs and Solar PV?
I've had an iBoost for 6 years. In total it tells me I'...
By Davesoa , 3 hours ago
-
RE: Say hello and introduce yourself
@editor I'm in south Essex. I've had some constructiv...
By GunboatDiplomat , 3 hours ago
-
RE: Octopus (the grid) is my battery
Octopus got back.... eventually.... today. For the peri...
By AllyFish , 5 hours ago
-
RE: Aira Heat Pump: Stylish Scandinavian Heating
I think their preferred business model is that the paym...
By IvanOpinion , 6 hours ago
-
-
You would think/hope that energy used in heating a buil...
By HarriUp , 15 hours ago
-
Viessmann Vitocal 250-A in the UK
Hi all, I was looking the some of the most efficient ...
By treehugger , 16 hours ago
-
RE: Vaillant Arotherm Settings for New Installation
@bontwoody Can you open all valves, and reduce flow tem...
By HCas , 18 hours ago
-
-
RE: Is this a bad installation and is there something wrong with my Samsung heat pump?
@transparent Pipe is just plain black seems like it’s d...
By David999 , 22 hours ago
-
RE: EV charger installation question – I don't want to bury the cable
@transparent It is Podpoint Solo3 indeed. Thanks ...
By Hem , 2 days ago
-
RE: Rate the quality of your heat pump design and installation
@mjw321 welcome to the forums. Please start a new topic...
By Mars , 3 days ago
-
RE: MCS Heat Loss Calculations
Exactly. Hall, stairs and landing are just another roo...
By JamesPa , 3 days ago
-
RE: Recommended ASHP installers in Hampshire
@benson If you do speak to Ian, just mention Mike in Re...
By Toodles , 3 days ago
-
RE: New Installation - Grant Aerona 3 + 210L Hot Water Cylinder
@macfxd LLH = Low Loss Header - it's on the right of ...
By MikeFl , 4 days ago
-
RE: ASHP Cut-off Temperatures: What's Your Setting and is a Your Heating Still On?
@technogeek Yes it does. It's in the field settings
By LeChillou , 4 days ago
-
RE: New Fogstar 15.5kWh upright solution
Yes, its on 21C 24/7 from end Sept until start of May. ...
By Vince31 , 4 days ago
-
RE: Creating a second zone on Mitsubishi Ecodan ASHP
Thanks for your time with this Gary. I have a wireless...
By BryanB , 5 days ago
Latest Topics
-
Viessmann Vitocal 250-A in the UK
By treehugger 16 hours ago
-
By HUBB84 3 days ago
-
By jswhite 3 days ago
-
By Abernyte 3 days ago
-
By Mars 4 days ago
-
Recommended ASHP installers in Hampshire
By benson 4 days ago
-
Vaillant Arotherm Settings for New Installation
By bontwoody 4 days ago